Rosco's haynes Build - Haynes Forums

Rosco Rosco's haynes Build... 26th October 2014, 07:13 PM

Rosco Then got things marked out... 26th October 2014, 07:14 PM

Rosco I was surprised how quick it... 26th October 2014, 07:15 PM

Rosco http://i133.photobucket.com/al... 26th October 2014, 07:15 PM

Rosco Got my roll bar bent up... 26th October 2014, 07:16 PM

garyt welcome and that's some... 26th October 2014, 07:56 PM

Rosco Haha cheers, it has been two... 26th October 2014, 08:34 PM

thailoz Great progress well done 26th October 2014, 09:11 PM

K4KEV Nice one Rosco and welcome to... 27th October 2014, 08:36 AM

dubzter great progress in such a... 27th October 2014, 11:48 AM

flyerncle Welcome to house of fun,save... 27th October 2014, 11:51 AM

SeriesLandy Looking good. Is the pedal... 27th October 2014, 01:39 PM

Rosco Cheers Haha, I hope... 27th October 2014, 08:02 PM

Rosco A bit more done tonight, took... 28th October 2014, 10:08 PM

Rosco Some more progress ready for... 30th October 2014, 07:35 PM

garyt you're definitely not hangin... 30th October 2014, 08:07 PM

voucht I'm also very impressed with... 31st October 2014, 05:31 PM

Rosco Your build seems to be moving... 31st October 2014, 08:15 PM

Dualist Nice work, at this rate... 31st October 2014, 08:37 PM

SeriesLandy You seem to be blazing along.... 31st October 2014, 08:40 PM

Rosco Ok mate cheers, prob use 2mm... 2nd November 2014, 06:44 PM

SeriesLandy It will flex when you brake.... 2nd November 2014, 07:00 PM

Rosco Ok mate cheers, no problems,... 2nd November 2014, 07:20 PM

SeriesLandy If your going to use mx5 bits... 2nd November 2014, 07:24 PM

Rosco Yeah I'm use using sierra... 2nd November 2014, 07:46 PM

SeriesLandy I've no idea what the cutouts... 2nd November 2014, 07:49 PM

Rosco Haha ok cheers, thought i was... 2nd November 2014, 07:51 PM

SeriesLandy Found the pedal box here... 2nd November 2014, 07:56 PM

Rosco Got my chassis welded up this... 9th November 2014, 07:32 PM

Rosco http://i133.photobucket.com/al... 9th November 2014, 07:33 PM

Rosco Not so much progress as as I... 18th November 2014, 09:41 PM

Rosco http://i133.photobucket.com/al... 18th November 2014, 09:42 PM

Tatey Rosco, do you know what... 19th November 2014, 07:01 AM

Rosco Cheers, think im going the... 19th November 2014, 08:13 AM

Rosco Bit of an update, got my rear... 7th December 2014, 06:06 PM

twinturbo Try ebay for a column, or... 7th December 2014, 07:26 PM

Rosco Yeah I've got my eye out but... 7th December 2014, 08:12 PM

Rosco Well had a full day on the... 15th December 2014, 07:58 AM

Rosco http://i133.photobucket.com/al... 15th December 2014, 08:00 AM

flyerncle Quality !;) 15th December 2014, 10:53 AM

K4KEV Very tidy indeed, keep it up... 15th December 2014, 01:01 PM

garyt nice work and good progress,... 15th December 2014, 07:05 PM

Rosco Cheers guys I like to get a... 15th December 2014, 08:24 PM

Rosco Got my rear wishbones back... 20th December 2014, 07:58 PM

Rosco Fitted the old calliper to... 20th December 2014, 07:59 PM

Rosco http://i133.photobucket.com/al... 20th December 2014, 07:59 PM

Rosco after sleeping on this a... 22nd December 2014, 07:35 AM

Rosco Well got a bit of time on my... 26th December 2014, 08:28 PM

Rosco Got a bit more done this... 27th December 2014, 03:28 PM

Rosco Well had a good day, went and... 28th December 2014, 08:23 PM

Dualist Those new arms look really... 30th December 2014, 05:49 PM

Rosco Cheers for the comments! Sat... 30th December 2014, 09:56 PM

ayjay Whens the divorce ?:o 31st December 2014, 12:57 PM

Rosco Haha, not yet, she's putting... 31st December 2014, 06:02 PM

Rosco Bit more done today, had my... 31st December 2014, 06:02 PM

Rosco http://i133.photobucket.com/al... 31st December 2014, 06:03 PM

Rosco I can rase the car up or down... 31st December 2014, 06:03 PM

wylliezx9r When I had a bike engine in... 31st December 2014, 07:10 PM

Tatey Ross you want the input and... 1st January 2015, 08:50 AM

Rosco Ok mate thanks for that, it's... 1st January 2015, 01:24 PM

Rosco Just been looking at engine... 1st January 2015, 01:24 PM

Rosco http://i133.photobucket.com/al... 1st January 2015, 01:25 PM

flyerncle Argument was about angle of... 1st January 2015, 02:20 PM

Rosco Sorry I'm confused, what... 1st January 2015, 02:41 PM

Tatey Ross you can just use a 2 UJ... 1st January 2015, 02:23 PM

Rosco Yeah I thought that but I... 1st January 2015, 02:43 PM

Rosco Few exhaust clearance... 1st January 2015, 03:02 PM

Rosco Well spoke to AB performance... 5th January 2015, 09:09 PM

Rosco Think I've got clearance... 5th January 2015, 09:09 PM

jps I believe the Equinox scuttle... 6th January 2015, 08:29 AM

Rosco yes if you wouldn't mind,... 6th January 2015, 10:43 AM

voucht Hi, Have look... 6th January 2015, 02:47 PM

Rosco Cheers, very helpful! 6th January 2015, 08:23 PM

Rosco Engine position... 6th January 2015, 08:23 PM

jps Pics didn't come out so well... 6th January 2015, 10:01 PM

jps Forgot to mention, those... 6th January 2015, 10:02 PM

flyerncle Before you go to far think... 7th January 2015, 09:17 AM

Rosco Yeah, I'm going to run a... 7th January 2015, 07:02 PM

Rosco Well had a measure up for my... 9th January 2015, 08:00 PM

SeriesLandy Looking good so far. Don't... 9th January 2015, 10:53 PM

Rosco Cheers, will do 10th January 2015, 05:40 PM

Rosco Got my radiator mounted today... 10th January 2015, 05:41 PM

Rosco Then I set about making some... 10th January 2015, 05:41 PM

Rosco I decided to rubber mount my... 10th January 2015, 05:42 PM

Rosco Side engine... 10th January 2015, 05:42 PM

dubzter That's some real tidy work... 11th January 2015, 10:57 AM

Rosco Cheers, pretty pleased with... 11th January 2015, 04:43 PM

Rosco Busy evening tonight, My... 12th January 2015, 10:06 PM

Rosco http://i133.photobucket.com/al... 12th January 2015, 10:06 PM

Rosco http://i133.photobucket.com/al... 12th January 2015, 10:07 PM

Rosco Got my coolant hoses on... 13th January 2015, 09:15 PM

Rosco That's running from the lower... 13th January 2015, 09:15 PM

Rosco I just need to decide where... 13th January 2015, 09:17 PM

Rosco First job today make a dummy... 17th January 2015, 03:35 PM

Rosco http://i133.photobucket.com/al... 17th January 2015, 03:35 PM

flyerncle You may want to add some sort... 17th January 2015, 05:57 PM

TheArf I think you might find that... 19th January 2015, 09:07 AM

Rosco Got my seats from JK... 24th January 2015, 07:41 PM

Rosco http://i133.photobucket.com/al... 24th January 2015, 07:41 PM

Rosco http://i133.photobucket.com/al... 24th January 2015, 07:42 PM

rpjg1975 Looking good there, sure... 24th January 2015, 08:29 PM

SeriesLandy You don't have to have a... 24th January 2015, 08:45 PM

Rosco Yeah you can use the steering... 24th January 2015, 09:19 PM

rpjg1975 Ah cool, that's good then :D 24th January 2015, 11:52 PM

Rosco Got a bit done this... 30th January 2015, 07:48 PM

Rosco I've had these cut out of 2mm... 30th January 2015, 07:49 PM

Rosco Picked up a cat today to,... 30th January 2015, 07:49 PM

NeilW Great build so far mate, nice... 31st January 2015, 07:07 PM

Rosco Cheers, yeah get cracking! 1st February 2015, 07:29 PM

Rosco Down my dads all day today,... 1st February 2015, 07:30 PM

Rosco http://i133.photobucket.com/al... 1st February 2015, 07:31 PM

Rosco Right no updates for a few... 10th March 2015, 08:36 PM

Rosco http://i133.photobucket.com/al... 10th March 2015, 08:36 PM

Rosco Clean parts bin filling... 10th March 2015, 08:37 PM

Rosco Parts painted by my dad while... 10th March 2015, 08:38 PM

Tatey Build is looking very good... 11th March 2015, 01:01 PM

Rosco Cheers mate, I'm going to... 12th March 2015, 08:57 PM

Tatey I believe it is a... 12th March 2015, 09:17 PM

SeriesLandy I used these olive bearing... 12th March 2015, 10:21 PM

flyerncle As above they are the same on... 13th March 2015, 08:00 AM

Rosco Well the lathes almost there,... 20th March 2015, 07:38 PM

Rosco http://i133.photobucket.com/al... 20th March 2015, 07:39 PM

Rosco I'm happy with the silencer... 20th March 2015, 07:40 PM

Rosco A bit of an update tonight, I... 30th March 2015, 08:56 PM

Rosco Pedals http://i133.photobucke... 30th March 2015, 08:57 PM

dubzter that pedal box looks amazing,... 30th March 2015, 09:00 PM

Tatey Lathe and pedal box are... 30th March 2015, 09:30 PM

metal matt Now that is a fine bit of... 30th March 2015, 09:32 PM

Rosco Cheers for the comments, it's... 1st April 2015, 10:21 PM

Rosco A bit more done tonight, I... 1st April 2015, 10:21 PM

flyerncle Porn in metal that pedal... 2nd April 2015, 10:31 AM

Rosco Had a good few days on the... 6th April 2015, 05:13 PM

Rosco http://i133.photobucket.com/al... 6th April 2015, 05:14 PM

Rosco Rear diagonal... 6th April 2015, 05:14 PM

Rosco This weeks progress I... 12th April 2015, 01:48 PM

Rosco Upper seat brackets done, I... 12th April 2015, 01:49 PM

Rosco Clutch... 12th April 2015, 01:50 PM

scutter Dude, still mighty... 12th April 2015, 06:29 PM

Ianr Daren't put any pics of my... 12th April 2015, 06:46 PM

dubzter Awesome work, looking forward... 12th April 2015, 10:11 PM

Rosco Lol cheers, just a bit of... 13th April 2015, 07:56 PM

flyerncle Excellent tweeks to original... 14th April 2015, 08:21 AM

vmax1974 A bit like rosco"s build... 14th April 2015, 09:21 AM

voucht Hi Rosco, As everyone here,... 14th April 2015, 12:25 PM

flyerncle Exactly !;) 14th April 2015, 12:53 PM

Rosco Cheers for the comments guys!... 14th April 2015, 10:01 PM

flyerncle If you have a spare five... 16th April 2015, 11:00 AM

Rosco Haha yeah, when my cars... 26th April 2015, 06:36 PM

Rosco Good progress the last few... 26th April 2015, 06:36 PM

Rosco Exhaust altered and posted... 26th April 2015, 06:37 PM

Rosco http://i133.photobucket.com/al... 26th April 2015, 06:38 PM

Rosco Bit of an update, didn't have... 9th May 2015, 09:23 PM

Rosco More slugs... 9th May 2015, 09:24 PM

Rosco http://i133.photobucket.com/al... 9th May 2015, 09:24 PM

Rosco Machining the blocks to house... 9th May 2015, 09:25 PM

Rosco Steady progress this week I... 16th May 2015, 09:09 PM

Rosco http://i133.photobucket.com/al... 16th May 2015, 09:10 PM

Rosco Lower engine mounts tacked... 16th May 2015, 09:11 PM

Rosco Also made myself a list, my... 16th May 2015, 09:11 PM

SeriesLandy Looking fantastic as... 16th May 2015, 09:46 PM

Rosco Cheers, some good points... 16th May 2015, 10:10 PM

Rosco Cheers, my dad's made good... 17th May 2015, 05:52 PM

SeriesLandy You now need to apply... 17th May 2015, 08:38 PM

Rosco cheers for that, letters in... 20th May 2015, 01:24 PM

Rosco Got my stearing wheel last... 24th May 2015, 07:56 PM

Rosco http://i133.photobucket.com/al... 24th May 2015, 07:57 PM

CTWV50 This is going to be a... 24th May 2015, 08:55 PM

Rosco Haha thanks, everybody needs... 24th May 2015, 09:16 PM

Rosco Went off up to Race... 26th May 2015, 08:10 PM

SeriesLandy I've got the same dash and... 26th May 2015, 08:35 PM

Rosco Not much to get on with this... 31st May 2015, 03:53 PM

Rosco Also got my bead roller... 31st May 2015, 03:53 PM

Rosco http://i133.photobucket.com/al... 31st May 2015, 03:54 PM

Badger Some nice tinwork there mate,... 31st May 2015, 11:52 PM

SteveH1 Hi Do you have plans for the... 4th June 2015, 09:14 PM

Rosco yeah just winged it, it works... 5th June 2015, 03:18 PM

Rosco Prop shaft turned up from... 7th June 2015, 09:27 PM

Rosco Gear linkage mocked... 7th June 2015, 09:28 PM

Rosco http://i133.photobucket.com/al... 7th June 2015, 09:29 PM

Rosco http://i133.photobucket.com/al... 7th June 2015, 09:30 PM

Rosco Got a couple of prop catchers... 9th June 2015, 09:43 PM

Rosco Quick update, just tacking... 22nd June 2015, 08:56 PM

SeriesLandy Looking great like... 22nd June 2015, 10:06 PM

Rosco Cheers mate, yeah I'm going... 23rd June 2015, 08:02 PM

SeriesLandy One of the other companies... 24th June 2015, 07:22 AM

Rosco Well stripped my car down... 27th June 2015, 08:24 PM

Rosco Baffle plate and new oil... 27th June 2015, 08:24 PM

Rosco Got my sump fitted today,... 28th June 2015, 08:36 PM

Rosco Got my carbon fibre tube that... 7th July 2015, 09:25 PM

Rosco Needed a tool to strip my... 12th July 2015, 08:10 PM

Rosco http://i133.photobucket.com/al... 12th July 2015, 08:10 PM

Rosco Got my fuel... 12th July 2015, 08:11 PM

Rosco Rear seat... 12th July 2015, 08:11 PM

Rosco Made a few modifications to... 13th July 2015, 07:25 PM

Rosco Got my floor beaded tonight... 14th July 2015, 07:57 PM

vmax1974 Looking good as usual loving... 15th July 2015, 08:07 AM

Davidbolam Really nice build there. I... 15th July 2015, 12:10 PM

Rosco Urm, I'm not really sure to... 15th July 2015, 09:01 PM

Rosco Dropped my chassis and... 19th July 2015, 05:30 PM

Rosco http://i133.photobucket.com/al... 19th July 2015, 05:31 PM

NeilW Looks awesome mate, the pedal... 19th July 2015, 05:47 PM

K4KEV Well tidy mate, should... 19th July 2015, 06:52 PM

norton That looks stunning! I know... 20th July 2015, 03:53 PM

Rosco Haha thanks, your not the... 20th July 2015, 10:32 PM

Rosco Got the car spun over tonight... 20th July 2015, 10:34 PM

Rosco Then I drilled all the holes... 20th July 2015, 10:35 PM

SteveH1 Faip play cracking... 21st July 2015, 08:10 AM

More replies below current depth...

voucht If you will have a... 21st July 2015, 10:24 AM

flyerncle LAS Aerospace for cleco... 21st July 2015, 03:17 PM

tkpm There made just down the road... 21st July 2015, 07:14 PM

Rosco http://m.ebay.com/itm/38086863... 21st July 2015, 10:37 PM

Rosco Well got the rest of the... 22nd July 2015, 08:36 PM

voucht As I've already said, this... 20th July 2015, 03:36 PM

Rosco I could do pal, if I was to... 15th July 2015, 08:59 PM

Rosco Ok cheers, s2000 would have... 1st January 2015, 01:20 PM

garyt [QUOTE=Rosco;99095]Your build... 31st October 2014, 08:55 PM

Rosco We had another good weekend,... 2nd November 2014, 06:07 PM

Rosco http://i133.photobucket.com/al... 2nd November 2014, 06:08 PM

Rosco Then made some foot plates... 2nd November 2014, 06:08 PM

Rosco http://i133.photobucket.com/al... 2nd November 2014, 06:09 PM

Rosco http://i133.photobucket.com/al... 2nd November 2014, 06:10 PM

Rosco Got a bit done tonight, made... 2nd February 2015, 09:10 PM

Rosco Few hours tonight but was... 4th February 2015, 07:43 PM

Rosco Well I've been doing a few... 15th February 2015, 02:59 PM

Rosco Drawings ready for my laser... 15th February 2015, 06:58 PM

More replies below current depth...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode