Rosco's haynes Build

[voucht]

Originally Posted by Rosco

Yeah I think your right with the cooling, I'm going to have oil temp on my dash so will see how it go's, it's only got a water/oil cooler, I could always swap the under cover panel for a louvered one, will have to make a louver tool then

If you will have a water-to-oil cooler, you certainly won't need a louvered one (air-to-oil if it is what you mean), as the water-to-oil coolers, like Laminova coolers, are very efficient.

[flyerncle]

LAS Aerospace for cleco pins,good price and delivery don't forget the pliers too.

[tkpm]

There made just down the road from me

LAS Aerospace Ltd
Okehampton
Devon
EX20 1UA
01837 658081

[Rosco]

Originally Posted by voucht

If you will have a water-to-oil cooler, you certainly won't need a louvered one (air-to-oil if it is what you mean), as the water-to-oil coolers, like Laminova coolers, are very efficient.

http://m.ebay.com/itm/380868637385?_mwBanner=1 This is what its got, i meant i could louver the undearneath hatch cover to let some air out past the sump

[Rosco]

Well got the rest of the holes drilled last night and debured



I used Wurth Bond and Seal to bond it on, just put a small bead down the middle of all the rails covering all the holes, it was just enough as I was still covered in it!

My mate let me use his air rivet gun! It's a good job as there's no way I would of done it by hand