![]() |
|
#1
|
|||
|
|||
![]() Baggage limit weight is 22kg so don't pay for more cos you wont be able to bring it back,found that out at Sanford.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#2
|
|||
|
|||
![]() Quote:
Problem I have is there is literally zero space in the garage for anymore parts. ![]()
__________________
Total Spent so far - £xxxxx Last Purchase - Engine mounts, steering wheel, slave cylinder. |
#3
|
|||
|
|||
![]() Today I might start to add fluids to box and diff as my new seal kit arrived for the gbox. I am sure everything is pretty much confirmed so they shouldn't have to come out anymore. Is this a silly idea?
Also what oils are people using in type 9's and diff? I have read mixed opinions about using high spec oils vs standard basic.
__________________
Total Spent so far - £xxxxx Last Purchase - Engine mounts, steering wheel, slave cylinder. |
#4
|
|||
|
|||
![]() EP 80/90 is the old spec and would have went in box and diff back in the day,filling the box now is a good idea as it is a pain when all panelled up.
It will run out of the tailshaft if not carefull.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#5
|
|||
|
|||
![]() I tried to tackle the gearbox seals yesterday and I am a bit concerned (as usual). The seal at the outer end where prop shaft inserts is a bugger to get out. Should I be ok to try and prise it out with a flat blade against the toothed shaft? Before I start I thought I'd ask how people have removed it. Google is full of info saying lever it against the shaft but some people report all kinds of issues.
Also, a noob question if I may.... Am I ok to cable tie the cv boots on the driveshafts? I got some metal straps included but there a pita to put on.
__________________
Total Spent so far - £xxxxx Last Purchase - Engine mounts, steering wheel, slave cylinder. |
#6
|
||||
|
||||
![]() Quote:
|
#7
|
|||
|
|||
![]() Lever it out gently and be carefull not to bend the splines,try the prop on afterwards.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
![]() |
Thread Tools | |
Display Modes | |
|
|