|
|
#1
1st September 2015, 01:39 PM
|
|||
|
|||
MX5 Diff Mount
Fitted the diff last night, is the 205 measurement correct, it looks to me like the drive shafts will be point forward.
I also note that the front of the diff is not central to the transmission tunnel, is this correct? Thanks Dave 
|
|
#2
1st September 2015, 05:04 PM
|
|||
|
|||
|
what plans are you using? i am using a talon chassis kit and yes the drive flange is offset slightly and shafts point forward a bit. you need to take into account the sliding movement of the cv joints with suspension travel
|
|
#4
1st September 2015, 11:26 PM
|
|||
|
|||
|
Quote:
On the Saturn plans the driveshafts do point forward a bit. Have a look through the various threads of completed cars as the diff nose mount on those plans isn't strong enough. David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
|
#5
3rd September 2015, 07:18 PM
|
||||
|
||||
|
I'll second that.
Having the diff mount fail and snap the diff in two isn't much fun!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
