Noob with a new mx5 Saturn build.

[SteveH1]

Hi Norton
did u put in grp1 and 2 at the rear
and did d 13 fit ok
the saturn plans say it should be 304 but it seems to be too short
but I'm not sure i have grp1 and 2 correct i have grp 1 level with rs14 is that correct
thanks

[vmax1974]

Originally Posted by SteveH1

Hi Norton
did u put in grp1 and 2 at the rear
and did d 13 fit ok
the saturn plans say it should be 304 but it seems to be too short
but I'm not sure i have grp1 and 2 correct i have grp 1 level with rs14 is that correct
thanks

If I remember correctly grp1 and 2 should have a 5° angle upwards from rs14

[norton]

The diagonal that connects to the rear most rail was longer than the plans. I can't remember my final measurement. I assembled all the other rails then cut the diagonal to suit.

[norton]

I've got my brakes bled and working so hopefully that's sorted. I realise now though that I've stitched myself up for the fuel pipe routing. My gearbox mount is, sturdy and takes up a lot of room.

Would iva accept two 8mm fuel pipes passing through 30mm box section but insulated by grommets?

[Ianr]

gosh, don't know if they would but I wish I'd thought of that, made some extreme bends in mine to get past the same mount

[norton]

It might be a moot question as I don't think I can get my drill in there

[rpjg1975]

I managed to pick up a right angled drill attachment from lidl or Aldi a while back....one of those things that you spot and think "that might come in handy!"