Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Engine/transmission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 2nd January 2016, 09:53 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

hi mine is a 2003 1.8 and if you look on my build you can see mine but here is a description.
The fuel system is pressurized , so 1 fuel line rear to front then flexi to the fuel rail in (its behind the throttle body and TPS wiring, points down wards )
right, from the tank sender unit, you have 2 pipes, 1 goes into the fuel filter (suitably mounted) the fuel filter outlet goes to a T piece, one side of the T goes to the main fuel line, the other leg of the T goes back to the sender unit (return).
Thus the whole system is pressurized and on start up when you turn the key the in tank pump pressurises the system and then cuts out until the fuel is required by the injectors/ ecu/ etc.
I put a plate on top of the chassis rails (o/s rear lower corner) and mounted my filter there.
if you need any help or clearer pictures I can get some tomorrow . also I would need to check which pipe is which on the sender top as I cant remember of the top of my head.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:56 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.