Steveh1's build

[SeriesLandy]

You will have to cut the cable anyway. In its position on the plans it makes a nice arm rest as I have my seat all the way back

[SteveH1]

Originally Posted by SeriesLandy

You will have to cut the cable anyway. In its position on the plans it makes a nice arm rest as I have my seat all the way back

Fair enough
Have you a link to the seats you used
Thanks

[SeriesLandy]

The old style cobra seven's
They aren't as comfy as they look. My friend has a pair of jk composite seats that he finds really comfy but I didn't fit in them. I'm too wide, not that I'm fat.

My car

[SteveH1]

Originally Posted by SeriesLandy

The old style cobra seven's
They aren't as comfy as they look. My friend has a pair of jk composite seats that he finds really comfy but I didn't fit in them. I'm too wide, not that I'm fat.

My car

Yea they look nice with the pads
did he bolt them to the chassis or did he have runners
do they fit on a standard runners

[SeriesLandy]

Originally Posted by SteveH1

Yea they look nice with the pads
did he bolt them to the chassis or did he have runners
do they fit on a standard runners

My drivers seat is on a runner and the passenger is on 25mm box with m8 bolts straight into to the bottom of the seat.
I'm not too sure about the jk ones, I think he had a runner but I'm not sure. Have a look at the jk website they look nice but you need to sit in one first.
Tillet are also very nice but costly, especially in carbon

[garyt]

haha nice one with the bracket
my hand brake is further back and yes I shortened the cable . like said above try and lower it if possible mine lands nicely inside my arm when reaching for the gear lever, also I padded out the tunnel top so the handbrake appears lower.
Seats , I used westfield sports seats
if you troll through my build you will see photos of seat and handbrake if you need more shout and I'll take some better ones