Dave's Build (Attempt)

[Dave F]

Originally Posted by RichardH

looking good, the way your chassis sits now its worth getting some block of wood across each of the chassis rails and screwing down to the table , it will stop any twisting when welding, obviously at this point you are only tacking but it will still distort, i clamped as much as i could until the whole chassis was together and its straight as a die , ive read some horors of twisting as much as 10mm out

Was thinking about screwing it to the table and was wondering the best way to do it. I will get some lenghts of timber and pin it to the table.