|
|
|
|
#1
15th July 2016, 01:12 PM
|
|||
|
|||
Im a bit reluctant to get a pair of calipers just for the IVA and MOTs. I will try and make a linkage as discribed in Gary's link. Just a shame the chap didnt include any pics in that thread.
__________________
One day it will be on the road...... 
|
|
#2
15th July 2016, 08:17 PM
|
|||
|
|||
|
Hi Wain , are you on locost builders ? if so drop the guy adithorp a u2u message and see if he can get a picture / has a picture / or can describe the linkage for you even if he could send a private email to you. If not I can message him on your behalf
I will have a dig around and see what I can find Gary
__________________
remember we are not mad just creatively insane
|
|
#3
15th July 2016, 08:36 PM
|
|||
|
|||
|
just thinking it should be fairly straight forward to make a 2:1 or whatever you decide 180 deg crank connect the hand brake to the short side and the hand brake cable to the long side with a bit of thought you could make the long side, longer than needed with extra holes until you decide on the correct ratio.
This is probably the easiest way to increase effective pressure
__________________
remember we are not mad just creatively insane
|
|
#4
15th July 2016, 10:11 PM
|
|||
|
|||
|
I have just signed upto Locost builders now. After reading that threat it got me thinking, a piece of 3mm steel in a V shape mounted horizontally; longest end going to handbrake and shorter connected to brake cables, and like you say if i add holes i can adjust for optimal leverage.
I will post on Locost builders to see if he can share a pick, see if it is the same as what is in my head.
__________________
One day it will be on the road......
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
