Steveh1's build

[garyt]

great work it feels really good when you can sit her on wheels doesn't it ? for now I used a length of wood with a hole top and bottom instead of shocks at least you can then wheel it back and fore

[SteveH1]

Yea feels like a major milestone.
Ive used 25mm box in place of the shocks at the moment.

Did people find the rear upper wishbones too short on the saturn plans.

[garyt]

haha yes I had to redo them as I had massive negative camber on the back, if I remember right I shortened the lowers and have spacers to bring the wheels out

[SteveH1]

Originally Posted by garyt

haha yes I had to redo them as I had massive negative camber on the back, if I remember right I shortened the lowers and have spacers to bring the wheels out

I think i have enough meat on the upper wishbone to drill another further out so will give that a try first

[SteveH]

How have you mounted the gearbox?

[SteveH1]

Originally Posted by SteveH

How have you mounted the gearbox?

Hope these are helpful

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

the mount is an engine mount from the engine

[SteveH1]

This may be the last update on this site
Quiet sad really

Ok so here is where im at

Untitled by stephen harborne, on Flickr

Untitled by stephen harborne, on Flickr

This is what i have removed from the original loom

Havnt had a lot of time since ive been back from holidays but been tipping awayat the wiring