Talon Chassis

[vmax1974]

The tmxr is for the mx5 donor just ask him for the standard chassis kit of you are using a sierra donor

[CarlW]

Hi,

The message I got was that the chassis is sierra based, just with extra parts supplied to fit MX5 if required so just a case of bits I wont need.

[vmax1974]

I believe the transmission tunnel is different on the tmxr chassis he till do a type 9 tunnel for you just ask him when you order the flatpack

[CarlW]

Hi ya,

They emailed me saying all the tubes for both Transmission tunnels are supplied!

[alga]

Zetec and Type 9 is a popular combo. One thing to keep in mind when making the chassis is that either the gear stick (and the reverse light switch), or the thermostat housing is interfering with the chassis. The solutions are either to use the Raceline Zetec water rail, or make a cutout in the tube that is the rear top of the engine bay (with another tube backing it), or modify the transmission tunnel and shift the engine a bit forward (compromising the gear stick reach).

https://get.google.com/albumarchive/...CvdS-B4840xtdI
https://get.google.com/albumarchive/...ZfGb5EXWQQVixG
https://get.google.com/albumarchive/...e3bQ8St8enHwpo

[NeilW]

I've got some Zetec engine mounts if they'd be useful for you

[CarlW]

Hi ya,

Which mounts are they?

Is there any reason the engine is so far back?
In my CAD model, the engine wasn't that far back?