Talon Chassis

[vmax1974]

I believe the transmission tunnel is different on the tmxr chassis he till do a type 9 tunnel for you just ask him when you order the flatpack

[CarlW]

Hi ya,

They emailed me saying all the tubes for both Transmission tunnels are supplied!

[alga]

Zetec and Type 9 is a popular combo. One thing to keep in mind when making the chassis is that either the gear stick (and the reverse light switch), or the thermostat housing is interfering with the chassis. The solutions are either to use the Raceline Zetec water rail, or make a cutout in the tube that is the rear top of the engine bay (with another tube backing it), or modify the transmission tunnel and shift the engine a bit forward (compromising the gear stick reach).

https://get.google.com/albumarchive/...CvdS-B4840xtdI
https://get.google.com/albumarchive/...ZfGb5EXWQQVixG
https://get.google.com/albumarchive/...e3bQ8St8enHwpo

[NeilW]

I've got some Zetec engine mounts if they'd be useful for you

[CarlW]

Hi ya,

Which mounts are they?

Is there any reason the engine is so far back?
In my CAD model, the engine wasn't that far back?

[TheArf]

I think you will find you struggle to reach the gear stick if the engine is to far forward, my seats are on runners and I am able to reach but if your not on runners you have to very careful where you place the gear stick in relation to the seat, if that makes sense

Arfon

[NeilW]

Originally Posted by CarlW

Hi ya,

Which mounts are they?

Is there any reason the engine is so far back?
In my CAD model, the engine wasn't that far back?

If you look in my build diary you can just about see them. They are the round tube style ones. Really well made tbh. Also have a few other Zetec bits laying around, flywheels, clutch release bearings, spigot bearings, overhaul deal kit for type 9 box, shortened oil pickup maybe more but would need to dig them out.

[CarlW]

Hi Guys,

Guess there must be different bell housings and drive shafts etc.
As you can see, my engine is a long way off the bulkhead, its about 100mm away.
The model is about 1mm acurate to the parts all measured.