|
|
#1
12th August 2016, 06:00 PM
|
|||
|
|||
Top Wishbone Book Dimensions?
Hi Guys,
I have my future build in CAD now and a question that may be one thats been answered. My top wishbone from end of M18 tube to center of wishbone bushes measeures 236mm. The bottom wishbone measures 442mm from the end of the ball joint mounting plate to wishbone bushes. But when I have 1.75 degrees of negative camber, the thread left on the top ball joint (Transit Drop Link) is only 3mm of thread after the lock nut??? Cheers! 
|
|
#2
15th August 2016, 09:09 AM
|
|||
|
|||
|
Nothing on your build is set in stone that can not be modified to suit,dont rely on a machine to build your car,CAD is not God spelt differently lol
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
