Hi Ricky....they are 17" with 205 50's and fill the arch's beautifully, The CA18DET is a fantastic engine that will take stage 1,2 and 3 with only programmed chips in a normal ecu....I did have it at stage 3 but went back to stage 2 as it was more controllable/predictable, for loads of info join Driftworks and SXOC they were invaluable for prepping the engine loom and tuning tips.
Take care with the trans tunnel at the gearstick area as it needs to be a little wider to accommodate the passage of the two large flat nuts either side of the gearbox, they are indent springs for the gearstick to "spring from side to side".
Everything I did to fit the engine is there in my thread, just takes a while to find it lol.
|
18th June 2018, 10:44 AM
Threaded Mode