Steveh1's build

[SteveH1]

Originally Posted by TheArf

I really love the front hinged bonnet, I bought a bonnet that was a second and the return at the edge was poor, so I cut the return off, countersunk holes right along the edge of the bonnet and riveted in an ally rerun then went over the rivet heads with filler sanded back and painted it. No it isn't perfect but it did allow the bonnet to be held closer to the correct shape as I mounted 4 vertical pins from the chassis which then pick up on the ally return.

Arfon

This bonnet was supposed to be a second but to be honest it should of went in the bin it has already been cut in 3 before this