Noob with a new mx5 Saturn build.

norton FOR SALE - MX5 Saturn build. 22nd May 2015, 11:10 AM

norton http://i14.photobucket.com/alb... 22nd May 2015, 11:12 AM

K4KEV Hi Norton whats your proper... 22nd May 2015, 11:19 AM

norton Cheers Kev, I can't... 22nd May 2015, 11:26 AM

Numplumb Hi Gavin and welcome 1 of... 22nd May 2015, 11:34 AM

norton Hi Mick and thank you, yes I... 22nd May 2015, 11:40 AM

Stot Hi, It depends on the... 22nd May 2015, 11:47 AM

norton Thanks Stot, Hmm that's... 22nd May 2015, 11:52 AM

norton I made a start on the... 22nd May 2015, 06:38 PM

twinturbo Speedy progress, well done!... 22nd May 2015, 07:06 PM

garyt Welcome, that's good progress... 22nd May 2015, 08:19 PM

SeriesLandy Looking great so far, you've... 22nd May 2015, 09:24 PM

Ianr I've just gone through this... 22nd May 2015, 11:19 PM

norton Thanks for the feedback guys... 23rd May 2015, 04:12 PM

CTWV50 Yes they will I run pro 1.2... 24th May 2015, 02:30 AM

Rosco Coming along nicely 24th May 2015, 07:33 AM

norton 13" wheels AND 1.8... 24th May 2015, 08:52 AM

dubzter looking good and impressive... 24th May 2015, 05:22 PM

norton Another arm done. I've also... 25th May 2015, 06:46 PM

Davidbolam Welcome to the forum and a... 25th May 2015, 09:38 PM

flyerncle Nip the shroud of the Mig... 26th May 2015, 03:16 PM

norton Zinc/nickel plating... 10th August 2015, 07:28 PM

TalonMotorFabrication I can't remember exactly as... 10th August 2015, 08:22 PM

norton Thanks for the tip. Much... 10th August 2015, 10:29 PM

CTWV50 Any chance of you showing us... 20th August 2015, 11:23 AM

norton I'll post up some pics... 20th August 2015, 11:46 AM

norton I've been... 23rd September 2015, 05:44 PM

SeriesLandy Congrats buddy. Was he/she... 23rd September 2015, 07:31 PM

norton Thank you! She, just over 4... 23rd September 2015, 07:33 PM

SeriesLandy My little girl is 1 today.... 23rd September 2015, 07:36 PM

norton The past month feels like 5... 23rd September 2015, 07:39 PM

vmax1974 Congratulations from mrsvmax... 23rd September 2015, 08:00 PM

norton Thank you! 23rd September 2015, 08:40 PM

SteveH1 Congratulations. Its absolute... 23rd September 2015, 09:54 PM

Ianr Congratulations - it does go... 23rd September 2015, 10:11 PM

rpjg1975 Congratulations. I can echo... 24th September 2015, 01:43 PM

JasonL My little girl just started... 27th September 2015, 09:36 AM

norton Thanks again guys, shes... 27th September 2015, 04:15 PM

Rosco Awwww congratulations mate,... 27th September 2015, 08:30 PM

norton Thanks bud, yes she is waaaay... 27th September 2015, 09:42 PM

norton So amidst the chaos I've... 5th October 2015, 01:53 PM

CTWV50 Nice! Is that a mk2 1.6? 5th October 2015, 03:48 PM

norton Thanks, yes a mk2 engine and... 5th October 2015, 03:50 PM

SteveH1 Hi Norton I was just... 6th October 2015, 08:13 AM

norton Hey, the threaded tubes I got... 6th October 2015, 07:30 PM

Rosco coming along nicely mate,... 7th October 2015, 08:26 AM

norton The latter half of next year... 8th October 2015, 02:45 PM

norton http://i14.photobucket.com/alb... 8th October 2015, 02:47 PM

Rosco that looks wicked! is it out... 9th October 2015, 09:05 AM

norton Yup, the VHT stuff. I cheated... 9th October 2015, 09:21 AM

norton Nearly ready to go... 10th October 2015, 01:59 PM

Rosco Dont get to excited! Youve... 11th October 2015, 09:00 AM

Ianr Arrrgh! Wiring! Just taken me... 11th October 2015, 09:05 AM

norton That's what I want to hear! 11th October 2015, 01:15 PM

norton I'm gonna get The car fitted... 11th October 2015, 01:19 PM

CTWV50 So many annoying little... 11th October 2015, 01:29 PM

norton Yes ms for me. I've fitted... 11th October 2015, 01:38 PM

norton So I've had another go at... 12th October 2015, 03:55 PM

norton Can anyone offer any insight... 13th October 2015, 06:53 PM

norton More work now but less in the... 14th October 2015, 01:51 PM

norton Loads of clearance around the... 14th October 2015, 04:48 PM

SteveH1 Hi I was just wondering what... 15th October 2015, 01:26 PM

Rosco looking wicked, i wish i had... 15th October 2015, 01:28 PM

voucht The car and engine look... 15th October 2015, 01:35 PM

norton I'm not sure of the plate... 15th October 2015, 02:00 PM

norton Sylvain, you're probably... 15th October 2015, 02:12 PM

norton So I'm looking to order some... 15th October 2015, 03:22 PM

Stot I have mine zip tied to the... 15th October 2015, 04:04 PM

norton Try eBay auction number... 16th October 2015, 07:38 PM

norton Thanks for the tips stot,... 16th October 2015, 07:42 PM

SteveH1 Thank you for getting back 16th October 2015, 08:48 PM

norton So I've fitted the exhaust... 17th October 2015, 02:28 PM

norton Does anyone know if the book... 18th October 2015, 01:15 PM

Badger Simply: No. They don't meet... 18th October 2015, 10:45 PM

CTWV50 Use a piece of thick walled... 18th October 2015, 10:54 PM

norton Hey guys, thanks for all the... 19th October 2015, 11:14 AM

norton I should have been more... 18th October 2015, 04:37 PM

TalonMotorFabrication How thick is the cross bar... 18th October 2015, 04:50 PM

norton I'll measure it when I'm home... 18th October 2015, 04:51 PM

norton The tube is 33.5mm thick. 19th October 2015, 01:27 PM

CTWV50 I've had the same thoughts, I... 18th October 2015, 10:03 PM

norton Yes!i was having similar... 19th October 2015, 11:23 AM

CTWV50 Great minds think a like!... 19th October 2015, 08:19 PM

norton Well, I'll have a go with the... 19th October 2015, 08:23 PM

CTWV50 Cool, I've got two spares so... 19th October 2015, 08:26 PM

norton They have an oil supply to... 19th October 2015, 08:30 PM

CTWV50 I see, can only be a good... 19th October 2015, 08:34 PM

norton Again that was my thoughts. I... 19th October 2015, 08:39 PM

CTWV50 Hahaha! :D 19th October 2015, 08:40 PM

CTWV50 What car is that/they? My... 19th October 2015, 08:47 PM

norton The g60 looks superb, I bet... 19th October 2015, 08:55 PM

CTWV50 Big engine Capri, very cool,... 19th October 2015, 09:06 PM

metal matt I'm not to sure about how to... 20th October 2015, 07:53 AM

norton So I'm up and running again... 5th February 2016, 06:51 PM

garyt just adjust the height of the... 5th February 2016, 07:39 PM

norton Hi, I' tried putting the bar... 5th February 2016, 07:55 PM

norton So the rear frame and roll... 14th February 2016, 10:04 PM

norton New... 16th February 2016, 07:51 AM

garyt looking good there and it... 16th February 2016, 07:22 PM

TheArf I'm not 100% sure on this,... 17th February 2016, 08:48 AM

SeriesLandy I was thinking about... 17th February 2016, 09:54 AM

flyerncle There is no requirement for a... 17th February 2016, 10:25 AM

norton Joy, I'll research it and... 17th February 2016, 10:29 AM

norton Could I leave the roll bar... 17th February 2016, 02:25 PM

TheArf If your not using it for your... 17th February 2016, 05:02 PM

flyerncle Yes exactly,but make sure... 18th February 2016, 11:52 AM

TheArf The Westfield we have in work... 18th February 2016, 01:21 PM

norton Its built now so I'm... 18th February 2016, 01:58 PM

flyerncle Has the main tube of the hoop... 18th February 2016, 04:40 PM

TheArf No it doesn't have the... 19th February 2016, 09:07 AM

SeriesLandy Best to give them a ring at... 19th February 2016, 09:15 PM

norton I will be yes, thank... 19th February 2016, 09:26 PM

norton http://i14.photobucket.com/alb... 19th February 2016, 09:26 PM

norton Has anyone here successfully... 20th February 2016, 03:59 PM

alga Well, Caterhams don't have... 20th February 2016, 06:06 PM

norton Thanks Alga, I am tempted as... 25th February 2016, 09:19 AM

SeriesLandy They didn't look under my... 25th February 2016, 09:22 AM

norton Thats what I wanted to hear.... 25th February 2016, 10:00 AM

Rosco Im going for just switches on... 28th February 2016, 10:52 PM

norton Hey, yes I saw your tunnel... 8th April 2016, 08:34 PM

norton Tank is fitted! I painted the... 10th April 2016, 05:48 PM

K4KEV [QUOTE=norton;103356]Tank is... 11th April 2016, 07:39 PM

norton Yeah it didn't take long to... 12th April 2016, 09:59 AM

Rosco looking good mate! we need... 13th April 2016, 08:16 AM

norton So after a bit of a break I'm... 16th October 2016, 06:59 PM

garyt And join us on our Scotland... 16th October 2016, 07:01 PM

norton Scotland? Jeez I'll be... 29th October 2016, 06:09 PM

garyt lol it's called a sense of... 29th October 2016, 09:10 PM

norton I've been busy... 3rd December 2016, 02:15 PM

norton I'll be starting on the side... 3rd December 2016, 02:16 PM

SteveH1 Nice job looks well 3rd December 2016, 02:22 PM

robj Nice job you've done there.... 3rd December 2016, 05:15 PM

norton Thanks guys, I'm really... 3rd December 2016, 05:32 PM

norton One side panel is coming... 6th December 2016, 05:24 PM

voucht Hi, First congratulation for... 6th December 2016, 07:48 PM

norton I should have said I've used... 6th December 2016, 08:08 PM

SteveH That's exactly how I want the... 6th December 2016, 08:16 PM

norton It was far easier than I... 6th December 2016, 08:20 PM

SteveH What size sheet of aluminium... 6th December 2016, 08:23 PM

norton It started life as 2500x700mm... 6th December 2016, 08:26 PM

norton The offside side panel is... 9th December 2016, 06:31 PM

garyt Nice work there as regards... 11th December 2016, 10:02 AM

norton Thanks Gary, I like the sound... 11th December 2016, 12:25 PM

norton Can anyone tell me how far... 4th January 2017, 04:31 AM

voucht Hi, The wheel arch follows... 4th January 2017, 03:00 PM

norton You're s star thank you! I'll... 4th January 2017, 05:59 PM

norton Exhaust. http://i14.photobuck... 10th January 2017, 05:50 PM

SteveH1 Lookin good fair play. Where... 10th January 2017, 06:08 PM

norton Thank you, they're from... 10th January 2017, 06:12 PM

garyout Looking good mate how was the... 11th January 2017, 07:26 AM

norton It wasn't too bad once I'd... 11th January 2017, 07:51 AM

garyout yea I agree top job I get the... 11th January 2017, 08:44 AM

CTWV50 Oooo looking good, like that... 11th January 2017, 12:24 PM

Ianr I did similar with my exhaust... 12th January 2017, 11:43 AM

CTWV50 That's my kind of solution!... 12th January 2017, 12:54 PM

norton Some more done. I just need... 13th January 2017, 04:58 PM

SteveH1 Sweet. Where are the seats... 13th January 2017, 05:01 PM

norton These but with black piping.... 13th January 2017, 06:37 PM

SteveH1 How snug are they 13th January 2017, 06:58 PM

garyout Looking the part mate very... 13th January 2017, 07:08 PM

norton In the car, very. On me (I'm... 13th January 2017, 07:13 PM

garyout Hi mate I like that very... 13th January 2017, 07:31 PM

norton eBay. Carbon look vinyl wrap... 13th January 2017, 07:34 PM

garyout Cheers mate Gary :D 13th January 2017, 08:02 PM

norton I managed to get an hour in... 19th January 2017, 07:14 PM

Rosco looking cracking mate, some... 20th January 2017, 07:32 AM

norton Thanks Rosco, I'll give them... 21st January 2017, 08:47 PM

garyt Hi lovely build and great to... 21st January 2017, 10:36 PM

norton Thanks Gary that'd be really... 22nd January 2017, 02:43 PM

norton I'm gonna have a punt at... 22nd January 2017, 11:15 PM

vmax1974 Not sure how true it is but... 23rd January 2017, 07:53 AM

norton I was hoping that was the... 23rd January 2017, 08:15 AM

Bonzo Sewing machines 23rd January 2017, 10:53 AM

Bonzo Here's a poor photo of my... 23rd January 2017, 11:31 AM

norton You are a star thank you!... 23rd January 2017, 12:14 PM

Bonzo The model I bought was Singer... 23rd January 2017, 01:23 PM

norton Thank you again. I'm going to... 23rd January 2017, 09:22 PM

norton I'm stuck on material choice... 30th January 2017, 11:13 AM

TSM Locost Good place to start ... 30th January 2017, 05:17 PM

norton Well, I found some black... 30th January 2017, 07:52 PM

Bonzo I'll be alright :) Watch a... 31st January 2017, 01:58 PM

norton I'm sure it'll be fine plenty... 31st January 2017, 07:07 PM

Bonzo Personally I would use a... 31st January 2017, 09:03 PM

norton I made some progress with the... 17th February 2017, 05:36 PM

SteveH Good work Apart from the... 17th February 2017, 06:17 PM

Bonzo Looking great, that's going... 17th February 2017, 06:50 PM

norton Thanks guys! The front edge... 17th February 2017, 07:03 PM

SteveH I meant how was the rear... 17th February 2017, 07:27 PM

norton Rivets where it meets the... 17th February 2017, 07:29 PM

norton I'm just about to order some... 8th March 2017, 07:07 AM

Ianr I used Gaz 14" open... 8th March 2017, 08:01 AM

norton Is that for a Sierra based... 8th March 2017, 12:25 PM

SteveH1 Try emailing protech the... 8th March 2017, 12:55 PM

norton I've spoken to them but... 8th March 2017, 01:07 PM

norton The thread I was thinking off... 8th March 2017, 01:08 PM

chris_smith I ordered 14" -... 8th March 2017, 06:58 PM

norton Is that a full 14" shock... 8th March 2017, 07:03 PM

chris_smith I ordered these... 8th March 2017, 07:08 PM

chris_smith I then ordered springs from... 8th March 2017, 07:08 PM

norton Are you happy with the ride? 8th March 2017, 08:08 PM

chris_smith It's not on the road yet to... 8th March 2017, 08:47 PM

norton Great stuff, thank you, I'll... 8th March 2017, 09:02 PM

Ianr Sorry for the slow reply -... 9th March 2017, 08:40 AM

norton I went for 14 and 12"... 16th March 2017, 05:36 PM

norton Hi guys, so things have... 14th April 2017, 07:22 PM

garyout Norton That's sad news mate... 14th April 2017, 09:59 PM

norton Cheers bud, I'm not massively... 14th April 2017, 10:55 PM

norton More on the cars spec, The... 15th April 2017, 01:22 PM

norton I'm having second thoughts.... 19th April 2017, 10:06 PM

SeriesLandy Are you going to regret... 19th April 2017, 10:11 PM

SteveH1 Of course its ok to leave it... 19th April 2017, 10:27 PM

norton I did a lot of if whilst she... 19th April 2017, 11:11 PM

SteveH1 God thats tough going its not... 20th April 2017, 06:33 AM

Ianr My vote would be to keep it.... 20th April 2017, 08:34 AM

norton I know your pain Steve, I... 20th April 2017, 01:13 PM

SeriesLandy I personally think you are... 20th April 2017, 02:27 PM

Bonzo I hope you do decide keep... 21st April 2017, 07:03 PM

norton I will regret it for sure.... 21st April 2017, 10:01 PM

norton I have some rear arches on... 25th April 2017, 12:53 AM

SteveH1 I havnt fitted my arches yet... 25th April 2017, 07:34 AM

norton Thanks dude. I wanted 'P'... 25th April 2017, 08:31 AM

SteveH1 Oh right dont plan on doing... 25th April 2017, 10:14 AM

norton I was going to use penny... 25th April 2017, 06:13 PM

norton Here's my most recent pics of... 1st May 2017, 10:57 AM

norton http://i14.photobucket.com/alb... 1st May 2017, 11:03 AM

garyout Norton That is looking... 1st May 2017, 11:20 AM

norton Yes, every time I look at it... 1st May 2017, 11:38 AM

norton Could anyone kindly measure... 1st May 2017, 11:42 AM

garyout Norton Cheers for link is it... 1st May 2017, 04:06 PM

norton It'll do the job but it looks... 1st May 2017, 04:24 PM

Rosco looking nice mate, keep... 11th May 2017, 11:34 AM

norton Thanks buddy, I'll keep at... 13th May 2017, 11:51 AM

norton Can anyone point me towards a... 14th May 2017, 01:53 AM

TSM Locost car builders cat. page 383 ... 14th May 2017, 08:37 AM

SteveH1 Try you local ford dealer.... 14th May 2017, 09:17 AM

norton So, I've been thinking more... 25th May 2017, 03:02 AM

garyt For what it's worth I went... 25th May 2017, 05:54 PM

norton How does it drive with the... 25th May 2017, 05:57 PM

garyt Awesome :) There are some... 25th May 2017, 08:23 PM

garyt Should also add if you want... 25th May 2017, 08:28 PM

garyout supercharger great sound... 26th May 2017, 09:06 AM

garyt It cuts down some of the... 26th May 2017, 11:37 AM

garyout I remember the supercharged... 26th May 2017, 12:58 PM

garyt Yep got a smaller pulley on ,... 26th May 2017, 04:15 PM

norton I am excited, most of all... 28th May 2017, 09:03 PM

norton Front arches... 29th May 2017, 08:13 PM

garyout Looking good mate are they... 29th May 2017, 08:23 PM

norton Cheers buddy, they are yes. 29th May 2017, 08:31 PM

garyout How wide are the rears be... 30th May 2017, 12:45 PM

norton Yes im really looking forward... 30th May 2017, 01:25 PM

norton Hi guys, could anyone please... 9th June 2017, 08:06 PM

voucht Hi, I don't know if you will... 9th June 2017, 08:15 PM

norton That's perfect, thank you... 10th June 2017, 09:56 AM

norton So photobucket has gone all... 9th July 2017, 07:31 PM

norton Considering I had no bodywork... 9th July 2017, 07:35 PM

norton And no, I couldn't get any... 9th July 2017, 07:36 PM

garyout She's looking mighty fine... 9th July 2017, 09:46 PM

norton Shhhhh, I'm trying to forget... 10th July 2017, 09:35 AM

dean211277 Looks really nice and neat.... 10th July 2017, 01:35 PM

norton Thank you, it's really come... 11th July 2017, 12:57 AM

SteveH1 I was just gonna mount the... 11th July 2017, 06:36 AM

norton I see a lot of people doing... 11th July 2017, 10:49 AM

SeriesLandy Mainly for Iva, I put a panel... 11th July 2017, 10:41 PM

Eternal seeing as photobucket has... 13th July 2017, 03:16 PM

norton I used both, glued along all... 13th July 2017, 04:13 PM

norton Some more progress today. The... 14th July 2017, 07:07 PM

garyt Blinkstop.co.uk Does various... 14th July 2017, 08:03 PM

norton Thanks Gary, I'll check them... 15th July 2017, 08:45 AM

norton Woot! Just bagged an Acewell... 15th July 2017, 08:33 PM

norton Can anyone shed any light on... 20th July 2017, 06:16 PM

norton Can anyone guide me please on... 25th July 2017, 12:41 PM

garyt Are you using stalks on the... 25th July 2017, 09:35 PM

norton No everything is to be dash... 25th July 2017, 10:08 PM

garyt Ok if all on the dash then... 25th July 2017, 10:22 PM

norton Thanks for the confirmation.... 26th July 2017, 08:50 AM

garyt Sounds good Hazards... 26th July 2017, 12:07 PM

norton Great stuff thank you again! 26th July 2017, 03:43 PM

norton Bonnet and an aero screen... 6th August 2017, 06:59 PM

garyout She's looking mighty fine... 6th August 2017, 09:34 PM

norton Thanks Gary, yes I'm getting... 7th August 2017, 06:37 PM

norton So my nice shiny new shocks... 10th August 2017, 09:16 PM

garyout Evening mate Is it the bush... 10th August 2017, 10:02 PM

norton They're the ones I have :( 10th August 2017, 10:05 PM

garyout That don't give me much hope... 11th August 2017, 08:38 AM

norton Well I've ordered a different... 11th August 2017, 07:34 PM

norton Air... 12th August 2017, 06:18 PM

norton Has anyone had any joy... 14th August 2017, 04:26 PM

mopple Try to put some washers/shims... 17th August 2017, 11:30 AM

norton That'll raise the rack and... 18th August 2017, 09:20 AM

norton Does anyone know if a... 12th September 2017, 11:46 AM

norton Here is my dash... 1st October 2017, 03:12 PM

norton Can anyone educate me a... 15th November 2017, 02:28 PM

Ianr That sounds about right. Mine... 17th November 2017, 09:01 AM

norton That’s reassuring, thank you. 17th November 2017, 09:19 AM

norton Hey guys, I had a little... 30th March 2018, 08:21 PM

norton Hi guys, I've looked through... 26th May 2018, 04:31 PM

norton Another q, has anyone sourced... 26th May 2018, 05:09 PM

norton https://i.imgur.com/P4iXEKK.jp... 3rd June 2018, 08:05 PM

SteveH1 Looking good Did you find... 3rd June 2018, 08:17 PM

Numplumb Hi Your car is looking good,... 5th June 2018, 11:00 PM

norton Hey, no I've not confirmed... 6th June 2018, 04:33 PM

Numplumb Thanks for that information,... 6th June 2018, 09:36 PM

norton Thanks for the info, even if... 10th June 2018, 06:16 PM

norton Has anyone got any pictures... 18th June 2018, 11:57 AM

SeriesLandy I used the double sided cable... 18th June 2018, 12:45 PM

norton I presume Iva man was happy... 18th June 2018, 12:56 PM

Ianr On mine the wiring is all on... 18th June 2018, 01:42 PM

SeriesLandy Yeah no mention as far as I... 18th June 2018, 07:08 PM

norton That's good news then, I'll... 19th June 2018, 04:38 PM

norton I've finally got the front... 22nd June 2018, 09:15 PM

Ianr The steering lock - or - even... 23rd June 2018, 08:41 AM

SeriesLandy Mine has the steering lock... 23rd June 2018, 09:27 AM

norton Yeah I did away with all the... 23rd June 2018, 11:20 AM

SeriesLandy Yeah I know what you mean... 23rd June 2018, 12:05 PM

norton Chassis material? 24th June 2018, 06:27 PM

SeriesLandy I think what I’m trying to... 24th June 2018, 08:11 PM

norton Ah I see! Also, you have to... 24th June 2018, 08:53 PM

Ianr Yes - if you look at the... 24th June 2018, 09:00 PM

Ianr Ooops - CTWV50 I meant 24th June 2018, 09:05 PM

SeriesLandy Not just the steel, you have... 24th June 2018, 09:53 PM

norton The major components I can... 24th June 2018, 10:01 PM

RandyBMC Very nice build - I'm glad... 28th June 2018, 02:52 PM

norton Hey, the small bypass goes... 28th June 2018, 05:59 PM

Ianr Just remember a word... 28th June 2018, 09:37 PM

norton Yeah, my morales are very... 29th June 2018, 08:44 AM

norton Quick question about the... 4th July 2018, 01:26 PM

norton Another problem if someone... 9th July 2018, 01:32 PM

Numplumb Are you using the mx5 flasher... 9th July 2018, 05:24 PM

norton No I’m using my own loom and... 9th July 2018, 05:30 PM

Numplumb I can't read your writing on... 9th July 2018, 06:19 PM

norton The module... 9th July 2018, 06:28 PM

norton I built a... 25th July 2018, 08:16 PM

norton Well, it’s running! It’s also... 22nd August 2018, 06:30 PM

garyout Another milestone I bet... 23rd August 2018, 06:48 PM

norton Yeah, it was a good feeling... 23rd August 2018, 07:35 PM

garyout oh!!!! I must admit I've... 27th August 2018, 07:04 PM

norton Turbo for sure, a charger is... 27th August 2018, 07:09 PM

garyout slow mate bloody slow messed... 27th August 2018, 09:54 PM

norton I didn’t use brake or clutch... 27th August 2018, 09:57 PM

garyout :) will have to take you up... 1st September 2018, 05:22 PM

norton I had a break. I became a bit... 5th January 2019, 02:07 PM

norton https://i.imgur.com/HQhphkC.jp... 9th July 2019, 07:26 PM

norton https://i.imgur.com/aLP4dWY.jp... 9th July 2019, 08:11 PM

twinturbo Looking PRO.. nice :) TT 18th July 2019, 08:06 PM

norton Hey, I was trying to make is... 19th July 2019, 03:14 PM

garyout Norton Looking good mate... 20th July 2019, 09:45 AM

norton Thanks Gary, it should look... 20th July 2019, 01:24 PM

garyout Norton Look forward to a... 20th July 2019, 06:15 PM

norton The white board is a great... 20th July 2019, 07:56 PM

garyout Evening Gavin Will... 26th July 2019, 07:39 PM

norton Hi Gary, I don't know about... 29th July 2019, 08:57 PM

norton I'm sure everyone will laugh... 31st July 2019, 04:48 PM

voucht Hi, There is nothing to laugh... 3rd August 2019, 10:00 AM

garyout Hi Gavin I am really sorry... 3rd August 2019, 05:57 PM

norton Cheers guys, all help and... 4th August 2019, 12:40 PM

CTWV50 Car's looking great. Who made... 27th February 2016, 11:17 AM

CTWV50 Hi, which I believe is a... 21st October 2015, 10:30 AM

norton Brake balance? 16th August 2015, 09:08 PM

Ianr Haven't test it yet but I... 16th August 2015, 09:36 PM

norton Hi David, I'm in... 26th May 2015, 03:25 PM

Stot Does your tig allow you to... 26th May 2015, 03:31 PM

norton Yes it does, good idea, I'll... 26th May 2015, 10:44 PM

SeriesLandy Whereabouts, being nosey? 27th May 2015, 10:19 PM

norton Not far from you. I don't... 27th May 2015, 10:29 PM

norton 3 down, too many to... 30th May 2015, 07:18 PM

norton I'm in a conundrum again... 31st May 2015, 10:22 AM

Ianr The way I read it is you need... 31st May 2015, 10:37 AM

norton Not to one car no. Balls.... 31st May 2015, 10:45 AM

PorkChop At the end of the day, does... 31st May 2015, 12:09 PM

norton This is the debate forming in... 31st May 2015, 01:40 PM

norton http://i14.photobucket.com/alb... 2nd June 2015, 10:00 PM

SteveH i want a set of them please... 2nd June 2015, 10:20 PM

norton Give me five million pounds... 2nd June 2015, 10:25 PM

SteveH do you have the tube... 5th July 2015, 09:11 AM

norton The rear lower arms I made... 5th July 2015, 09:20 AM

norton http://i14.photobucket.com/alb... 9th July 2015, 03:42 PM

j.brownster79 Hi Gavin good to see another... 12th July 2015, 11:27 PM

norton Thanks, I didn't think the... 12th July 2015, 11:47 PM

norton Can anyone advise on what... 24th July 2015, 08:11 PM

CTWV50 I used team dynamics 1.2... 24th July 2015, 08:21 PM

norton Thanks for the info, I'm... 25th July 2015, 08:48 AM

norton Can you submit a car for an... 28th July 2015, 07:57 PM

Davidbolam Not sure if it helps but my... 28th July 2015, 08:09 PM

norton Will that diff be damaged if... 28th July 2015, 08:14 PM

norton Chassis painted (badly) floor... 31st July 2015, 09:28 PM

NeilW Link... 31st July 2015, 10:13 PM

norton Thank you for the link. I... 1st August 2015, 07:59 AM

norton Can anyone recommend an... 4th August 2015, 04:38 PM

Stot I went with Yoko A021-R from... 4th August 2015, 06:25 PM

norton Thanks for the heads up stot,... 7th August 2015, 06:13 PM

Stot Not sure on the question, If... 8th August 2015, 07:57 AM

norton Predictive text fail! I... 8th August 2015, 08:14 AM

Stot Oh, yeah I did that too. ... 8th August 2015, 08:14 AM

norton Ah great stuff, thank you! 8th August 2015, 08:24 AM

Davidbolam I used the mx5 daisy alloys... 24th July 2015, 11:04 PM

CTWV50 Doh! You have clearly tried... 21st October 2015, 03:59 PM

norton No I used m14x1.5 threaded... 21st October 2015, 04:54 PM

CTWV50 Ahh I see. Thanks for that. 21st October 2015, 04:56 PM

norton So I need to organise myself... 22nd October 2015, 03:26 PM

Rosco You can post it to me if you... 22nd October 2015, 10:00 PM

norton That's a kind offer but... 23rd October 2015, 12:29 PM

Rosco ok mate, can you post a pic,... 23rd October 2015, 01:23 PM

norton I ll take a pic tonight when... 23rd October 2015, 02:51 PM

SteveH1 There was a thread on here... 23rd October 2015, 03:07 PM

norton Ok so,... 24th October 2015, 12:30 AM

Rosco Ok so why couldnt we just... 24th October 2015, 08:06 AM

norton The id is about 28mm. Have... 24th October 2015, 08:34 AM

norton Pedal box is more or less... 24th October 2015, 11:39 AM

Rosco I will have a look in the... 24th October 2015, 10:30 PM

Rosco Looking good! You can get... 24th October 2015, 10:31 PM

norton Cheers bud, I'm on a role... 24th October 2015, 10:42 PM

norton Brake hoses are now on... 27th October 2015, 07:02 PM

Rosco Yeah I could do with fitting... 27th October 2015, 08:39 PM

RichardH my mx5 donor was a mk2 it has... 27th October 2015, 09:29 PM

Ianr My master cylinder is mounted... 28th October 2015, 09:40 AM

Stot You could just file a couple... 28th October 2015, 10:45 AM

norton Thanks guys, I should've... 28th October 2015, 11:13 AM

norton Tight. http://i14.photobucket... 30th October 2015, 11:36 AM

norton Would a coiled copper pipe... 30th October 2015, 12:07 PM

Rosco how about get a flexi one... 30th October 2015, 12:22 PM

Stot The original is a coiled... 30th October 2015, 02:31 PM

norton I've been thinking of how to... 30th October 2015, 03:04 PM

norton Have you a pic of the flexi... 30th October 2015, 03:08 PM

flyerncle Stainless braided hose with... 30th October 2015, 03:28 PM

norton Kerr-ching. 30th October 2015, 03:59 PM

norton I hate brake pipes :mad: 31st October 2015, 12:23 PM

Stot Not at the moment but heres... 31st October 2015, 02:27 PM

norton I've had a tinker mocking up... 31st October 2015, 06:32 PM

norton Does anyone have a link to... 1st November 2015, 01:01 PM

norton So I've made up a clutch hose... 8th November 2015, 08:56 AM

voucht +1 If the pedal is too hard,... 8th November 2015, 10:17 AM

norton I considered the 0.625 mc but... 8th November 2015, 11:20 AM

Davidbolam My car uses a 0.7 cylinder... 8th November 2015, 10:22 PM

norton That's interesting, I'll fire... 8th November 2015, 10:31 PM

RichardH the banjo fittings may be... 9th November 2015, 06:55 AM

Ianr I don't know what the... 9th November 2015, 09:14 AM

norton I don't know the pedal box... 9th November 2015, 11:20 AM

norton Top... 17th November 2015, 10:49 PM

CTWV50 Hahaha, take your time! Lol! 17th November 2015, 11:38 PM

norton It's fiddly, boring and time... 17th November 2015, 11:46 PM

Rosco looks bloody mint pal! 18th November 2015, 10:46 AM

norton Thanks Rosco, it'd look even... 18th November 2015, 07:07 PM

Rosco Lol, send me a drawing and i... 18th November 2015, 09:46 PM

norton Well, exactly the same as... 18th November 2015, 10:07 PM

Rosco ok i will drop you a u2u, as... 19th November 2015, 05:15 AM

Stot Ill be adding a manual switch... 19th November 2015, 11:11 AM

SteveH1 Hi Norton did u put in grp1... 21st November 2015, 09:34 PM

vmax1974 If I remember correctly grp1... 21st November 2015, 10:08 PM

norton The diagonal that connects to... 22nd November 2015, 09:40 PM

norton I've got my brakes bled and... 25th November 2015, 07:28 PM

Ianr gosh, don't know if they... 25th November 2015, 09:31 PM

norton It might be a moot question... 27th November 2015, 06:41 PM

rpjg1975 I managed to pick up a right... 27th November 2015, 11:43 PM

RichardH any place you can get the... 28th November 2015, 08:43 AM

norton I'll figure it out, there has... 28th November 2015, 01:19 PM

alga Have you done your rear panel... 23rd December 2015, 12:51 AM

norton If you mean the small steel L... 23rd October 2015, 03:11 PM

SteveH1 Is it a bead ur looking to... 23rd October 2015, 03:16 PM

norton Yes that's the goal. 23rd October 2015, 03:48 PM

SteveH1 Ok so measure the... 23rd October 2015, 03:56 PM

K4KEV rather than split it grind it... 23rd October 2015, 04:51 PM

SteveH1 Yea musta been your thread i... 23rd October 2015, 05:05 PM

CTWV50 You need 8 points to get an... 2nd June 2015, 10:41 PM

mgglep Also if you have a q plate... 2nd June 2015, 10:50 PM

Ianr Thanks for this Chris - wish... 2nd June 2015, 11:08 PM

CTWV50 I'm not telling you to be... 2nd June 2015, 11:13 PM

CTWV50 Saying all of the above I was... 2nd June 2015, 11:17 PM

davedew To be able to get an age... 3rd June 2015, 04:38 PM

norton Thank you for the assistance... 3rd June 2015, 07:55 PM

davedew Needs to be original V5. If... 3rd June 2015, 09:31 PM

norton It's registration hasn't... 3rd June 2015, 09:46 PM

metal matt [QUOTE]The duratec can wait... 3rd June 2015, 09:47 PM

norton I don't think my impatience... 5th June 2015, 10:26 PM

metal matt I've got a polo rad on mine... 5th June 2015, 10:37 PM

voucht I know Polo radiators have... 5th June 2015, 10:37 PM

norton Ah the 190 rad sounds... 5th June 2015, 10:45 PM

garyt hi speak to k4kev on here he... 6th June 2015, 07:10 AM

Stot Try and buy a quality 190... 6th June 2015, 08:53 AM

Davidbolam Hi, that is the radiator I... 6th June 2015, 08:58 AM

TSM Locost Std polo rad is 380mm core... 6th June 2015, 10:50 AM

metal matt I made my tank myself then I... 6th June 2015, 11:04 AM

norton Money is tight so I went for... 6th June 2015, 01:23 PM

K4KEV The polo rad is man enough... 6th June 2015, 02:33 PM

norton That sounds ideal, very... 6th June 2015, 02:42 PM

K4KEV Nah... but it is bluddy damn... 6th June 2015, 03:20 PM

norton Some more done... 8th June 2015, 07:41 PM

norton I did trial fit the rear arms... 8th June 2015, 07:46 PM

vmax1974 They are quite tight and... 8th June 2015, 09:41 PM

PorkChop Stiff arms seem like a bad... 8th June 2015, 11:37 PM

Rosco looking nice mate! seems like... 9th June 2015, 07:41 AM

TalonMotorFabrication I think the whole crush... 9th June 2015, 08:56 AM

norton Ah yes, I understand the... 9th June 2015, 09:12 AM

TalonMotorFabrication When I bend my suspension... 9th June 2015, 09:38 AM

norton I'm using a vice yes. The... 9th June 2015, 10:02 AM

CTWV50 I dry assembled mine... 9th June 2015, 10:42 AM

TalonMotorFabrication Don't forget you don't have... 10th June 2015, 09:58 AM

norton Good point, persevere with... 10th June 2015, 10:11 AM

norton Does the Saturn run a shorter... 10th June 2015, 05:38 PM

CTWV50 Yes 12" rear,... 10th June 2015, 06:27 PM

norton RELIEF!!!!! I thought I had... 10th June 2015, 06:29 PM

CTWV50 Haha! Depending on how much... 10th June 2015, 06:50 PM

norton I'll look out for that,... 10th June 2015, 10:59 PM

norton http://i14.photobucket.com/alb... 11th June 2015, 05:26 PM

CTWV50 Yes I used some aluminium to... 11th June 2015, 05:43 PM

norton I'll do that this week. Next... 13th June 2015, 04:56 PM

norton Ok so I thought I'd bugger my... 14th June 2015, 01:32 PM

norton Underside. http://i14.photobu... 14th June 2015, 01:33 PM

garyt hi yep there a bit heavy :) ... 14th June 2015, 07:40 PM

Davidbolam If you look at skov's build... 14th June 2015, 10:41 PM

norton Thanks guys. My Ocd wants to... 14th June 2015, 11:09 PM

Ianr I've had the same issue as... 14th June 2015, 11:47 PM

CTWV50 Agree with this, I was... 15th June 2015, 09:39 PM

norton Thanks for the advice and... 17th June 2015, 07:02 PM

norton I originally set out to use a... 19th June 2015, 03:27 PM

norton Seats! http://i14.photobucket... 21st June 2015, 08:10 PM

Rosco http://www.haynes.co.uk/forums... 15th June 2015, 09:29 PM

norton I've worked the outer tubes... 10th June 2015, 09:45 AM

norton I don't know if I've buggered... 4th July 2015, 09:52 PM

CTWV50 Hmmmm, interesting! 4th July 2015, 10:18 PM

norton My sump sits 50mm below the... 4th July 2015, 10:20 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode