Complete pedal boxes.

[flyerncle]

Pink and Diamonte studded John.....

[3GE Components]

Originally Posted by flyerncle

Pink and Diamonte studded John.....

Is that to add grip to the pedals?

Regards

John

[flyerncle]

Not at all,Just to keep Fabby happy !

Although grippy surface is a requirement.

I sent you an e-mail John,if possible can it be done with twin cylinders too.

[Bonzo]

Looking good John

What's wrong with Pink !!

[SeriesLandy]

Originally Posted by AdrianH

John;

Just a comment if I may? Sod it I will anyway!

I made a mistake in assembling the pedal box and welding it all up before I offered up the master cylinder and only then realized i had to enlarge the hole to something like 29 mm.

The fact I had all the pedal brackets welded in place was a major pain when it can to holding the box on my mill and drilling the large hole.

It is only a suggestion that people specify the hole size to suit their master cylinder and for a few extra £'s you drill that for them, then weld it all up.

Just a thought.

Adrian

I had to do the same, however I hadn't welded up before.
I tacked a bit of angle iron over the hole so I could centre the arbour for the holesaw then filled the original mounting holes with weld.

At the time I thought it was just me so didn't comment.

[HandyAndy]

Originally Posted by AdrianH

I fabricated up a sort of sky hook on the mill bed with mine, still got it wrong and ended up drilling through a Vee block, I used a large cone cutter.

Sometimes i don't mind posting my build problems if it helps, but sometimes I think to myself DUH that was so stupid keep quiet.

It's all part of the game.

Adrian

Adrian, all info gained from you guys that are ahead of me & no doubt others is greatly welcomed, i,m no engineer or mechanic & sometimes the things being discussed go over top of my head but "ping" when the time comes when i confront the said subject i recall the thread/post & get it clear in my head what i need to do, so thanks for posting the items that you come across that cause a bit of head scratching, i assure you its helping me.
cheers
andy

[HandyAndy]

Originally Posted by AdrianH

I think you will find a few of mine on from time to time Screw ups that is!

Cheers

Adrian

i,d call them "challenges" , but hey thats what its all about innit?
cheers
andy