Question for Bonzo

Forgot to say cut one end of the oval tube to same angle the top rail is...think it's a 10degree cut this will have the brackets at right angle to centre line of the car.

[Bonzo]

Nice one Mark

More or less within those measurements then, About 20mm longer

Yes the angle of the cut was 10 degrees

That was from memory as been awhile since properly made one for folk but somewhere near...I gusseted the bracket to top shock mount as well.

[drury318]

Thanks for that, whilst you`re on Mark, did you measure the bonnet bulge for me as regards how high the bulge is and how far back it starts to rise? Dennis