![]() |
#11
|
|||
|
|||
![]() why yes just use stainless rivets
cheers les g |
#12
|
|||
|
|||
![]() damn, why didnt I think of that! And from my datasheets, should be quite a bit stronger than the standard alu/steel rivets
![]() |
#13
|
||||
|
||||
![]() Thanks guys, guess where i,m going tomorrow???
![]() ![]() cheers andy |
#14
|
||||
|
||||
![]() As long as you've got arms like Popeye...
|
#15
|
|||
|
|||
![]() or an air powered rivet gun
![]() |
#16
|
||||
|
||||
![]() well i used to be a sailor in the Merchant Navy.... does that qualify me?
![]() andy |
#17
|
||||
|
||||
![]() air powered rivet gun is the way forward. i got mine from axminster for £45. was worth every penny when i did the floor on the weekend. its the first time i have done large amounts of riveting and not felt dead by the end of it.
|
#18
|
||||
|
||||
![]() what size compressor would i need for the air powered rivet gun? i,ve seen a complete kit in Aldi, would that be upto the job?
cheers andy |
#19
|
|||
|
|||
![]() The rivet gun should state a rated pressure and flow per minute (cfm I think). Even a small compressor should be up to the task, 25L sort of size, it's not like you'll be firing it off 100 times a minute or anything
![]() |
#20
|
||||
|
||||
![]() most compressors will run one they require very little air.
|
![]() |
Thread Tools | |
Display Modes | |
|
|