![]() |
|
#1
|
|||
|
|||
![]() I got mine from a local bearing place... very cheap.
|
#2
|
|||
|
|||
![]() Has anyone managed to get hold of these seals? I'm in the same situation that the bearings all look good, the hubs are cleaned up and now all I need is the seal (and not a full bearing kit).
Looking at ebay the complete bearing kits seems to be around £15-20 and I'd rather avoid that if I can. Ta. |
#3
|
|||
|
|||
![]() Try local motor factors,probably cheaper for full kit than e-bay.
|
#4
|
|||
|
|||
![]() Blimey... so went to the local motor factos... £31/side
![]() Oil seals can't be bought seperately from them... surely there's an easier (cheaper) way? |
#5
|
||||
|
||||
![]() go to the local bearing company they will keep them.
|
#6
|
||||
|
||||
![]() Quote:
![]() ![]() As Ash says .... I'll be most surprised if your local bearing company are unable to get the seals for you ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk Last edited by Bonzo : 30th March 2010 at 03:17 PM. |
#7
|
|||
|
|||
![]() Blimey... so went to the local motor factors... £31/side
Thieving Ratbags ! cant remember exactly how much they were per kit but not hugely expensive but I am in the trade and use them daily. |
#8
|
||||
|
||||
![]() You see them all the time on Ebay for around a tenner. I got both of mine for under £15 delivered.
http://cgi.ebay.co.uk/Ford-Sierra-Hu...mZ120550246849 http://cgi.ebay.co.uk/FORD-SAPPHIRE-...mZ150425548680 http://cgi.ebay.co.uk/NEW-WHEEL-BEAR...mZ190361078867 |
![]() |
Thread Tools | |
Display Modes | |
|
|