However, 1/2" sockets and extensions are too clumsy for stuff like hard to get to intake manifold nuts (10mm-ish), something more nimble and compact would be useful. I suspect a 3/8" set would be ideal here.
Thats the joy of a 1/2" drive, that you can just pop a 3/8" adapter on the wrench and use smaller socket if required...... save on a 2nd set of extension bars, wrenches. But I admit I have a 1/4" for bench work (carbs and the such)
3rd September 2009, 05:38 PM
Threaded Mode