|
|
#2
24th September 2009, 12:44 PM
|
||||
|
||||
Looking at the drawing on page 178 it gives a radius of 18mm, in the absence of any other data on the drawing I assumed that the hole centre was 18mm in from the side of the plate
 That's the measurement I used, upright now fitted on the car & all is fine 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode