Front Upper Wishbone Jig

peter2482 Front Upper Wishbone Jig 30th September 2009, 07:46 PM

HandyAndy Hi, i know you have said you... 30th September 2009, 08:50 PM

peter2482 i will have to recheck it... 30th September 2009, 08:58 PM

HandyAndy it,ll be interesting to find... 30th September 2009, 09:13 PM

peter2482 we have loads of different... 30th September 2009, 09:19 PM

HandyAndy yes it is 5mm from the edge,... 30th September 2009, 09:25 PM

AshG i wouldnt worry too much. ... 30th September 2009, 10:56 PM

HandyAndy any news on what the problem... 1st October 2009, 08:18 PM

peter2482 hi andy, after checking and... 1st October 2009, 08:39 PM

HandyAndy at least you got it sorted... 1st October 2009, 08:48 PM

More replies below current depth...

30th September 2009, 09:19 PM

peter2482

Member

Join Date: Aug 2009

Location: kings lynn

Posts: 33

we have loads of different sizes at work

lol all to heavy walled for the chassis, but perfect for jigs etc. maybe i used a bit of that instead.
i set the plates 5mm in then tacked them on and tapped them over to 82 degrees, it is 5mm to the back edge of those plates isnt it...

__________________
my build so far.......
http://s921.photobucket.com/albums/a...2482/Roadster/

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 07:15 AM.