|
|
#2
6th October 2009, 10:07 PM
|
||||
|
||||
i think the 5mm spacers for the front lower wishbone jig are 195mm as in fig 5.3 on page 57,
as for the end plates that are 25mm x 6mm, looking at the large 8mm spacer in the center of the jig plate then looking at fig 5.12 on page 63 , you have the threaded round tube which is 30mm external diameter plus the 8mm spacer plate but remember to take into account the 98degree angle, does that help Andy? cheers andy 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode