Bush tubes & Camber adjusters

[HandyAndy]

look at the quality of the welding on the camber adjusters in the photo above then look at the photo of some camber adjusters on the ebay thread that cost more than Ronnie,s complete set , including delivery, thats a bargain with quality too

cheers
andy

[Bonzo]

That's no ordinary weld, it's a M&S weld.........45 degree angle groud on the threadded bar for full root penetration OO-ER Missus

[Talonmotorsport]

Which company is making the bushes, not just buying them in and moving them on but making the moulds and producing bushes 0.3mm under size?

[londonsean69]

Originally Posted by Bonzo

That's no ordinary weld, it's a M&S weld.........45 degree angle groud on the threadded bar for full root penetration OO-ER Missus

I did the same, gave it a decent chamfer for a root, with plenty of weave. Nice straight cap after that.
Mine were grade 12.9 bolts with the heads cut off.

The offerings from GTS are shockingly bad - why leave the bolt head on? It looks mank

Originally Posted by Talonmotorsport

Which company is making the bushes, not just buying them in and moving them on but making the moulds and producing bushes 0.3mm under size?

Go on, spoil us - who is flogging sloppy bushes??

[jasongray5]

Would love to get my hands on a pair of those nuts Ronnie

[flyerncle]

Go the whole hog Jason and have the root penetration treatment too !

(you started it Ronnie !)

[Bonzo]

That one had me rolling about the floor Paul, classic

Originally Posted by flyerncle

Go the whole hog Jason and have the root penetration treatment too !

(you started it Ronnie !)

[jasongray5]

Because even though I am a firm beliver that standards get you no where, even I have a limit...

Originally Posted by flyerncle

Go the whole hog Jason and have the root penetration treatment too !

(you started it Ronnie !)