Gingea1pom's Build Diary

[gingea1pom]

16 Oct 09

First job today was to move U7, then I tacked on D9 and 10, moved on to SB3 and 4 which where straight forward then SB 5 and 6, I couldn’t get my head around the drawing in the appendix so decided to cut them over length and then fettle to fit. Once I had the first one in the right place I could see the cut required and the drawing made sense!

Whilst fitting TR 6 and 7 I noticed that the top of U2 was in the wrong place by 8mm, glad things are only tacked at the moment, moved it into the correct position and fitted TR 5, 6 and 7.

I am going to fit the diagonals that run down the side of the car tomorrow so have flipped the chassis over to fully weld some of the joints that will get covered by the diagonals.

I have only fitted 10 pieces today but corrected some minor mistakes and the seat back diagonals took a while.