Electronic Ignition

[AshG]

[dogwood]

You did remember to use the Steel wheel didn't you?
You'll never get it off with all that loktight...


David

[HandyAndy]

nice work there Ash

andy

[AshG]

Originally Posted by dogwood

You did remember to use the Steel wheel didn't you?
You'll never get it off with all that loktight...


David

yes i did use the steel one as for the lock tight the intention was for it to never come off. if i take the crank pully bolt out it should come off as one unit.

[davidimurray]

Looking good Ash

I've decided to take the plunge myself and go down the Megajolt route so will be doing the same thing quite soon. Have you thought about putting a little dowel pin through the adaptor you made into the pulley as a location aid so you can repeatable put it back in the same position if you ever have to take it off. Also whereabouts are you thinking of mounting the sensor. I was thinking of putting mine at the 3 o'clock position when viewed from the front. Have you cut your dizzy down to keep the oil pump drive? I did mine a few weeks and there are some pics on my album below if they are any help.

Cheers

Dave