the jigs

[Bonzo]

Looking at my first edition of the book you are correct, two different lengths are stated !!??

Being as I worked form the drawings alone, I had not noticed this.

There is an ammendment for the first edition of the book this was to do with the lengths of the rear lower & upper wishbones.

The ammendment was to make the wishbones 10mm longer

I can only assume that the jig drawing is the pre-ammended length & the text is to the ammended length.

My own wishbones were made to the jig drawings + 10mm. They have all been test fitted to the chassis & running gear, all is fine.

If you do a search of the forum, you'll find a list of the book ammendments

Perhaps Chris will be along shortly to advise.

I hope this all make some sense.

EDIT

Found them

You'll find the ammended wishbone spec in this thread http://www.haynes.co.uk/forums/showthread.php?t=2430