|
|
#5
27th October 2009, 11:04 AM
|
||||
|
||||
Wishbone jigs
Looking af Fig 5.15 on page 65
The length of the plate is given as 465mm, Now asuming that an extra 10mm is required ( Ammended book spec ) The length of plate needed, will now be 475mm. The 25X25 box is welded on top & at each end of the jig plate. This will give you wishbone length of 425mm.
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie  www.roadster-builders.co.uk 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode