Exhaust flange CAD drawings

[davidimurray]

John

For your Pinto flanges what size are the inlet/exhaust hole? I was looking at getting mine cut to the same size as the port +1.5mm to allow for tube thickness. Are the exhaust ones cut to the square profile? Also do you include a hole for the water take off point on the head to the carbs. I'm not planning to use this so wouldn't want it on the flange.

Cheers

Dave

[flyerncle]

Try Shortrack I think Jason does them.

[3GE Components]

Originally Posted by davidimurray

John

For your Pinto flanges what size are the inlet/exhaust hole? I was looking at getting mine cut to the same size as the port +1.5mm to allow for tube thickness. Are the exhaust ones cut to the square profile? Also do you include a hole for the water take off point on the head to the carbs. I'm not planning to use this so wouldn't want it on the flange.

Cheers

Dave

Hi David,

Are you planning on puttnig the tubes inside the flange then? We can supply the hole sizes to suit this or to suit the tube welded on the plate. The exhausts are square in profile. We don't add the water take off point.

Kind regards

John

[RAYLEE29]

Hi, the standard 2.0L inlets are 36.7mm dia if it helps, (I cut an inlet flange from 6mm plate last weekend).im fitting gsxr 600 carbs. Ray

[squbti]

Is 8mm thick stainless steel plate enough for making the flanges?
cheers