![]() |
|
#1
|
||||
|
||||
![]() Thanks for that Andy. The book doesnt state in the back that i need multiples of them. I think the minimum length of flat bar that i can order is 6m anyway so i should have plenty of material left for some retries
![]() ![]()
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting ![]() |
#2
|
|||
|
|||
![]() Don't forget 2No. CP 24 (from 25x3mm)
__________________
Sean |
#3
|
||||
|
||||
![]() Right i think i have it cracked now. I've worked out that i need the following:
25mm x 3mm Flat Bar: CP24 = 89 x 1 SS1 = 449 x 1 Front Suspension Bracket = 360 x 2 + 2 x 40 + ..... 30mm x 3mm Flat Bar: CP19 x 1 CP20 x 1 CP21 x 1 Front Suspension Jig (Upper) Total Length: 40mm x 3mm Flat Bar: CP1 x 2 CP2 x 2 CP8 x 2 CP9 x 2 CP12 x 1 CP13 x 1 CP15 x 2 CP18 x 4 CP21 x 1 CP22 x 2 CP23 x 4 Front Suspension Jig (Lower) Total Length: 3.62m 50mm x 3mm Flat Bar: CP10 x 2 CP14 x 1 GM1 x 1 GM2 x 1 Total Length: 3mm Plate: CP3 x 1 CP4 x 1 CP5 x 2 CP6 x 2 CP7 x 2 CP11 x 2 CP16 x 1 CP17 x 1 CP25 x 2 EM1 x 2 EM2 x 2 EM3 x 2 EM4 x 2 Total Area Required: 0.470m^2 (Rough Area)
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting ![]() Last edited by Tatey : 1st November 2009 at 05:06 PM. |
#4
|
|||
|
|||
![]() from carter steel in stockton i got a length(6.5 meters i think) of 40x3 for under a tenner to give an idea of the price
|
#5
|
||||
|
||||
![]() Just rang my local supplier (i got all of my chassis steel from them for £100) and they quoted me £25 for 1 6m length of 40x3mm flat bar
![]()
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting ![]() |
#6
|
||||
|
||||
![]() Quote:
![]() ![]() Never paid much more than £6 a length for 40x3 Mild steel flat ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#7
|
||||
|
||||
![]() Well you live and learn eh, i'll shop around next time before i buy my steel.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting ![]() |
#8
|
||||
|
||||
![]() At least you got a decent deal on the chassis steel
![]() ![]() I was recently quoted £120 for the box section ![]() Steel prices are usually quite volatile, luck of the draw where you live & local demand.
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#9
|
|||
|
|||
![]() £8 40x3mm 6 mtr flat strip FM steelstock
|
![]() |
Thread Tools | |
Display Modes | |
|
|