New Build

[gingea1pom]

Originally Posted by HandyAndy

ps Ryan.... beware of when its time to paint the chassis

I am seriously thinking about powder coating after getting eyes on Ash’s roll bar. There is a place 10 mins from me I might pop down and get a quote, that doesn’t cost anything!

[HandyAndy]

Originally Posted by gingea1pom

I am seriously thinking about powder coating after getting eyes on Ash’s roll bar. There is a place 10 mins from me I might pop down and get a quote, that doesn’t cost anything!

the memory of painting my chassis still brings me out in a cold sweat

its one of those jobs thats very satisfying when completed but a pain to do

like you say Ginge.... a quote costs nowt

andy

[Bonzo]

Well done on taking the first big step of your build

You'll be off to a flying start with one of Andys chassis kits

Will follow your build progress with interest

[Ryan]

Cheers guys, I'm a little nervous about doing the lines if im honest! I know it has to be spot on so I'm taking my time (or putting it off!) I think thats a job that I will have to delegate to my co-builder!

As for painting the chassis there is a powder coating company down the road. I might pay them a visit for a quote when the time comes.

Any more hints or tips then for getting the lines drawn on?

Cheers

Ryan.

[dogwood]

Originally Posted by Ryan

Any more hints or tips then for getting the lines drawn on?

Ryan.

Yea you'll need these...

[dogwood]

Main thing is to make sure everything is square.
Don't assume your build table is.
Use diagonals to double check.


David

[AshG]

get some 0.5mm tip marker pens is my tip.

Originally Posted by dogwood

Main thing is to make sure everything is square.
Don't assume your build table is.
Use diagonals to double check.


David