Floor Riveting Order - Haynes Forums

Tim Taylor Floor Riveting Order 1st December 2009, 04:17 PM

HandyAndy Hi Tim, the way i did my ali... 1st December 2009, 04:36 PM

deezee I clamped my aluminium down,... 1st December 2009, 05:58 PM

flyerncle Question about the floor,have... 1st December 2009, 06:07 PM

dogwood I left mine open....:eek:... 1st December 2009, 06:14 PM

squbti Hi guys, i was thinking of... 1st December 2009, 06:34 PM

dogwood Yes, that's what I should... 1st December 2009, 07:14 PM

londonsean69 Did you put the side panels... 1st December 2009, 07:26 PM

dogwood Floor then side panels. I... 1st December 2009, 08:12 PM

londonsean69 Wish I has asked this BEFORE... 1st December 2009, 08:25 PM

dogwood You can put the floor over... 1st December 2009, 08:38 PM

HandyAndy i might be waaaaaay off the... 1st December 2009, 08:41 PM

AshG i drilled the floor except... 2nd December 2009, 01:43 AM

chriseyj I drilled my floor by... 2nd December 2009, 11:47 AM

cherno On my 7k I have used welding... 4th December 2009, 11:43 AM

HandyAndy i covered my transmission... 1st December 2009, 06:36 PM

#15

4th December 2009, 11:43 AM

cherno

Junior Member

Join Date: Dec 2008

Posts: 13

On my 7k I have used welding iron panel ( same panel from the back to the front of the chassis ) but open one for mecanic.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 12:04 AM.