Radiator Hose Inside Diameter

[ozzy1]

I used a polo rad with the zx9 motor and had no problems with overheating,got if from a company called felgenhaus on ebay .still listed part number 250469410183

[TSM Locost]

Try these, they list dims. www.northernradiators.co.uk Polo, Clio also Micra are popular.

[chriseyj]

Thanks for the reply, I have been doing some more searching and I think the clio rad part number is RT409 if anyone is interested.
Here's a new ebay link.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=280428599613

The zx9r has an extra connection on the rad for the oil cooler, do you think I will have any flow issues if I just used a t piece and connected this to the 32mm pipe feeding from the engine. I guess Kawasaki just connect it on the rad for convience.

Where in the circuit will an expansion tank go, it's hard to visualise because I didn't take the bike engine out.

I guess I'll have the flow going to bottom of rad and return connecting to the engine. Will I need another t piece for the expansion tank take off? Am guessing a zx9r uses a pressurised system.
Think I should ask for the zx9r manual for xmas

Thanks Chris