![]() |
|
#1
|
|||
|
|||
![]() cp6 et cp7
bien vu je corrige |
#2
|
|||
|
|||
![]() |
#3
|
|||
|
|||
![]() |
#4
|
||||
|
||||
![]() The upright measures 154-155 mm along the kingpin axis. See http://fridge.pov.lt/~alga/DSC_9346.JPG . The mushroom insert sticks out by 8 mm extra. The kingpin axis has a caster angle and the kingpin inclination, you can measure them approximately on the drawing on the page 75 of the book.
|
#5
|
|||
|
|||
![]() thanks a lot
|
#6
|
|||
|
|||
![]() It is all looking good man. There is a plan of seirra hubs compleat with mesherments some ware. Quick surch has found it for me umpteen times.
The peddal box: need a hydrolic clutch for BMW bits. The BMW one can be fabricated into the book box quite easaley. |
#7
|
|||
|
|||
![]() thanks again
i 've found him http://www.haynes.co.uk/forums/showt...ght=sierra+hub can i re use the hydraulic clutch from the bmw with this pedal box? |
![]() |
Thread Tools | |
Display Modes | |
|
|