![]() |
#2
|
||||
|
||||
![]() The first thing that springs to my mind is ..........On the drum set up, the drum backplate is rebated to the same profile as the RU plate on the upright
![]() Might be possible with a re-design of the uprights but the most obvious choice if unsure of what you want, is to make the uprights to suit drums & if the need arises, buy some adapters from 3GE for disc conversion ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
Thread Tools | |
Display Modes | |
|
|