Pedal box?

[flyerncle]

Make the plate from one piece top rail to bottom rail and from each side of the two uprights,should give you a plate of approx 350x330 use a piece of 25x25 angle for the mountings and this will give you a nice 90 deg to weld the brackets on and add the flat strip to the floor and fix to it. (or thats what I intend to do)

[dogwood]

Originally Posted by flyerncle

use a piece of 25x25 angle for the mountings and this will give you a nice 90 deg to weld the brackets on and add the flat strip to the floor and fix to it.

Yup that's pretty much how I did it

David

[flyerncle]

Cheers David.