25mm tubing for front lower wishbone

[Talonmotorsport]

Sorry to put a damper on that but I'm sure 'happyjo' was asking for front lower wishbone tubing which last time I checked was 25mm or 1" OD and that is 20mm OD might it not be alittle tight for the wishbone plate from Mr. Oxley Rogue Eng. on ebay? Happyjo if you want the correct tubing for the wishbones PM me and I will sort you a price for either just tube supply or fully profile cut tubes on the lathe.

[dogwood]

Originally Posted by Talonmotorsport

Sorry to put a damper on that but I'm sure 'happyjo' was asking for front lower wishbone tubing which last time I checked was 25mm or 1" OD .

You're not wrong, he was. Sorry got myself all exited.
Then I'll go back to my original suggestion.
http://www.hublebas.co.uk/index.htm


david

[flyerncle]

I'm saying nowt.....

[bigheppy]

Can anyone explain if cds is the same as cfs as I can find plenty of cfs mechanical with a bs3623 bk mechanical spec TA

[Talonmotorsport]

yes CFS (cold formed seamless) is simular if not the same to CDS (cold draw seamless) I would recommend how ever increasing the 19mmx1.6-3/4"x16gauge up to 2mm-14gauge as it's just alittle stronger and will help when it comes to putting the 8' up kick on the top front.

[dogwood]

Originally Posted by Talonmotorsport

I would recommend how ever increasing the 19mmx1.6-3/4"x16gauge up to 2mm-14gauge as it's just alittle stronger

I agree, and did.

David