SVA requirements for steering column

murpia SVA requirements for steering... 29th January 2008, 12:03 PM

jabs This from the SVA... 29th January 2008, 12:31 PM

Guest These pictures might help... 29th January 2008, 12:37 PM

murpia Fig. 1 of the offset joints... 29th January 2008, 01:19 PM

Guest It's a minimum of 10 degrees,... 29th January 2008, 01:50 PM

CurlyBen One option might be to have... 31st January 2008, 12:02 PM

macdave69 Daft Question But why would... 31st January 2008, 10:44 PM

colt_mivec Depends on the build,What... 3rd February 2008, 01:06 AM

macdave69 Nope still don't get it 3rd February 2008, 01:45 AM

Guest I'd be wary of the shear pin... 3rd February 2008, 02:02 PM

More replies below current depth...

29th January 2008, 01:50 PM

Chris Gibbs

Posts: n/a

It's a minimum of 10 degrees, and as the SVA manual says "it is unlikely that joints of this type will work at angles above 30 degrees"

So it's between 10 and 30 degrees.

cheers

Chris

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 02:21 PM.