Best Way to make 4 into 1 Collector

[Talonmotorsport]

Failing that you could just buy one for £78 off ebay.

[Tatey]

I've had a quick look on ebay, what about 2, 2 into 1 collectors followed by 1, 2 into 1 collector, this picture explains it much better:

http://cgi.ebay.co.uk/LOCOST-VINDICA...t _1096wt_939

Im guessing this will use AshG's method, but im not sure if it will be easier to fabricate than a 4 into 1 collector.

[dogwood]

This is how I made mine.
Using a piece of 2" tube.
I slotted it down 4 sides, about 4".
Then I spread it apart till it fitted the 4 pipes.
I then cut out 4 wedge shapes to fill the gap.
Then just fettled and welded it into place.
As Ash says though, don't forget to weld between the 4 pipes
before you fit them

[AshG]

here is another way to do it.

http://www.youtube.com/watch?v=J7oC44v4fy8

[Johnnybizzle]

Thanks for the help guys will tackle a paper template tomorrow and beat the hell out of it, good job ive got plenty of sheet this may take more than one attempt

Cheerz