Track widths and wheel base

[GraemeWebb]

Originally Posted by Jimbob

I'm building some front and rear uprights from BMW hubs. Mostly because I had them lying around but that's another matter.

This means I've got to work out the best position for wishbone fittings on the mods to the hubs.

Does anyone know the exact front and rear track and wheel base for the roadster?

Ta

Hi,

I am using front and rear beemer hubs from an E36. Rears are pretty much sorted but am still busy with the fronts. What top joint location on the hub are you planning for the fronts? I plan to fabricate something that will attach to the strut locations.
I hope to do a layout drawing of the Sierra/roadster front suspension this weekend. Then overlay the BMW hub in such a position to keep the track the same. I will then modify wishbone thengths to suit, keeping geometry and roll centres within an acceptable range.
Where are you based?