Ronnie,it's what is pleasing to you that matters and I like the red but it depends what you put with it for body colour and black seems to be the in colour for the chassis.
Graeme and Mr P,I should have explained more. I did not have a jig just measured the front lower bracket dimensions and placed it on the front frame and put the studding through and measured the distance from the front one.
As for slotting the bracket I would only do the hole nearest the rear bracket to bring the lower bone into line with the rear bracket and therefore hopefully not upset the geometery but be assured it will be corrected before being welded.
Once again all input gratefully recieved and hope this helps others.
Cheers.
|
14th February 2010, 06:59 PM
Threaded Mode