|
|
|
|
#1
18th February 2010, 08:02 PM
|
||||
|
||||
Quote:
 
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie  www.roadster-builders.co.uk 
|
|
#2
18th February 2010, 09:41 PM
|
||||
|
||||
|
Event the completely metric Sierra uses 7/16" UNF for all the seatbelt mounts! I've put aside the bolts just in case and cut out some of the captive nuts of the rear seatbelt mounts to reuse on the roadster.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate.
|
|
#3
18th February 2010, 10:57 PM
|
|||
|
|||
|
I used M10, as long as they are m8 or bigger your fine acording to iva book 7/16 is about 11mm for referance i made some adapters fancy steped washers to fill the oversize hole in the harnesses
tilly
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
