![]() |
#3
|
||||
|
||||
![]() For the bush tubes Enoch you need to dog them right up, the poly bushes will then compress slightly and the brackets will clamp the s/s tubes so that the poly bushes rotate around the s/s tubes. They can squeek but if you use copper slip grease on the s/s tubes this will stop this. Some people recommend silicone grease but at nearly £20 a tube its expensive and i have found copper slip to be better.
There should be no play on the joint and be relatively stiff to move by hand, they will soon wear in. Regards....AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH |
Thread Tools | |
Display Modes | |
|
|