what mm ali to use? - Haynes Forums

layotn20 what mm ali to use? 5th March 2010, 12:56 PM

Tilly819 i think i used 1.6 for the... 5th March 2010, 01:41 PM

layotn20 cheers mate 5th March 2010, 01:45 PM

Tilly819 also i think iv used 1/8th... 5th March 2010, 01:53 PM

deezee Remember that aluminium comes... 5th March 2010, 02:49 PM

layotn20 what grade and mm, would you... 5th March 2010, 03:37 PM

deezee I've used a 2mm 5251 H22 for... 5th March 2010, 03:48 PM

layotn20 when sheeting your floor etc... 5th March 2010, 07:09 PM

Bonzo Some folk cover the floor... 5th March 2010, 07:25 PM

layotn20 cheers for the info. 5th March 2010, 07:40 PM

spud69 I like to leave the tranny... 5th March 2010, 07:47 PM

twinturbo How many sheets do you need... 22nd March 2010, 02:01 PM

mark I got all the interior panels... 23rd March 2010, 11:50 AM

twinturbo Got these prices from my... 26th March 2010, 02:16 PM

5th March 2010, 03:37 PM

layotn20

Senior Member

Join Date: Mar 2010

Posts: 107

Quote:

Originally Posted by deezee

Remember that aluminium comes in many strengths and grades and you can get a 1.2mm sheet that is harder than a 2mm sheet

For rivet spacing, 10 times the rivet width is a reasonable rule of thumb.

what grade and mm, would you recomend for floor and rear seat section? im just gona do it with the same alli saves buying different sheets?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 05:10 PM.