Identify Wires

[geeman]

Originally Posted by twinturbo

What engine are you using, and what have you done with the engine loom?

TT

ive got a 1.8cvh. Ive got it to turn over, and was being an idiot earlier, as i wanst looking at the ignition coils in my last post. Ive now found the ignition coils, and the plug from the edis connects to it. I now seem to have the ignition coils sorted, however when i was trimming my loom a mont or 2 back, i cut off all the plugs to the steering column, including the ignition switch. I am now wondering what i am meant to connect the black/yellow wire to that is on the ignition switch. I know the blue/black one goes tot he starter solenoid, but i dont know about the yellow/balck one.


Ill be asking alot of probaly very obvious questions as i dont know much about wiring this engine. Thanks


Edit: just saw your other post. i have connected the plug fromt he front body loom to the +12v. Now to figure out what the yellow.black wire is meant to be? it goes to pin 10 of the edia and the engine managemnet relay according to the haynes diagram

[DaddyA]

If you haven't got a manual, i've got an electronic version of the wiring i can send if you want??

[geeman]

Originally Posted by DaddyA

If you haven't got a manual, i've got an electronic version of the wiring i can send if you want??

I have that, its just im still no good with this wiring

[twinturbo]

EDIS? Are you runing megajolt?

Black Yellow, Goes to the ignition relay and fuse 20, 21 , 22.. Maybe some more items but bascaly It's Ignition Live Feed.

TT

[DaddyA]

you'll just have to do a bit at a time, be careful because the wires tend to change colour as they go along!!

[geeman]

Originally Posted by twinturbo

EDIS? Are you runing megajolt?

Black Yellow, Goes to the ignition relay and fuse 20, 21 , 22.. Maybe some more items but bascaly It's Ignition Live Feed.

TT

umm.. sorry again, didnt mean to say edis, meant to say hybrid ignition module. , imm really not doing to well here am i

[geeman]

ok, for the time being, as i dont have an ignition swith, and am just trying to get the engine running, can i just connect the black/yellow to 12v and that to the relay and the hybrid ignition module, ?

[twinturbo]

Do you have the engine loom with the three multiplugs ( 4, 6 , 8 pin ) Still intact.

It's 10 years since I have worked on a CVH but the wiring to the engine hookup is the same for all post 90 cars.

TT

[geeman]

Originally Posted by twinturbo

Do you have the engine loom with the three multiplugs ( 4, 6 , 8 pin ) Still intact.

It's 10 years since I have worked on a CVH but the wiring to the engine hookup is the same for all post 90 cars.

TT

are those the 3 that join the main loom to the engine loom. I have attached the 4 and 6 pin ones, however, i cant find anywhere to attach the 8 pin one. Thanks for the help so far!!!! Also i just realised that relay that the starter solenoid wire is connected to is an auto trans relay? WHats this for considering i dont have auto trans?

[twinturbo]

There's 2 different loom diagrams for the 1.8 CVH manual ( GR8!! )

Do you have Relay X1 or not?

TT