![]() |
|
#1
|
|||
|
|||
![]() Hi all
thanks for all the advice, iv sorted out the hazards and the side lights so they can now be switch on without the ignition.... very big thank you to ASH who spent about an hour and half of his time on the phone to me eirlier going thew a few bits and bobs that was a massive help so chears ASH... car is in the trailor ready to go, not driving there due to the lean mix at high rpm id rarther not risk it, might drive it back depending on how it goes and if i think i can resist plowing my right foot into the pedal box im not under any illusion.....im dam sure it will fail on something i havent even thought of but like you have said at least i get a list of things to do and hopefully some advice on how to do them to the required standard thanks tilly |
#2
|
|||
|
|||
![]() Word on the street is that Tilly has passed he re-test today - no doubt he will be posting later!
![]() ![]()
__________________
http://www.picturetrail.com/sfx/album/view/19919222 |
#3
|
||||
|
||||
![]() Excelent!
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#4
|
||||
|
||||
![]() I eagerly await the good news
![]() ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
![]() |
Thread Tools | |
Display Modes | |
|
|