Zetec and IVa

[twinturbo]

There is no requirement at all to have a CAT fitted.

Just a requirement to pass the emissions test at that level.

But that's very difficult without a CAT .

TT

[Russ_16v]

Originally Posted by twinturbo

There is no requirement at all to have a CAT fitted.

Just a requirement to pass the emissions test at that level.

But that's very difficult without a CAT .

TT

Thank you for clearing that up guys, so im guessing that is why most start off with Pinto's / CVH's?

[twinturbo]

It's one reason,

It's also what comes with the donor

And the engine management can be easily reused without worring about the PATS security system

TT

[spud69]

Russ,

Just get a 1.8cvh 1992 Sierra through IVA on easy emissions then it's an easy exchange up to a 2.0l Zetec on bike carbs.........175bhp for easy dosh.

I've had a drink but that's the easy and cheapest way to mega-power....

[AshG]

or quite simply you could just put a cat on it! there are some pretty nice looking stainless sports ones that you can get for round the £120 mark

must be the first person in the world to suggest that on a kitcar site

[Russ_16v]

Thats just it Spud, its going to take me a while, and doing an engine change will end up taking me ages, so id rather try to get it through with the engine its going to stay with if its possible?

[twinturbo]

Make sure the CAT is E-Approved though or you could be in for a BIG Fine.

If I were putting a post 92 engine in from a cat doner then I would just fit a cat and leave it there.

TT

[Russ_16v]

well i work for a VW dealer so i have the use of emissions equipmemnt, so i can always have a play around and see how i get on

[HandyAndy]

Hi Russ,

as Spud has said, use an engine from a donor car, whatever engine you get , use it, then to change an engine is quite easy really, more so if you use a TYPE 9 gearbox as the zetec will bolt straight to it with a little mod, if you use a cvh for the iva then you have most parts ready for the swap to a zetec....flywheel, starter motor etc etc.......

I,ll stick my neck out here & say if you have all the parts ready...new engine etc then it,d be a weekends work to swap em over

Also, you,ll be quite surprised how "quick " the Roadster will be even when using a cvh / pinto / twinky ( dohc ), lets say you have a cvh engine with approx 80hp..... & a Roadster that only weighs approx 500 to 550 kgs .... thats quite a nice power to weight ratio

sorry if i,m messing up your plans

cheers
andy