Rear Discs

[adrianreeve]

Carl

Sorry, I forgot to reply to this one! I used the seiw one at £22. I found that if you fit it to the plate at the rear o the tranny tunnel, then cross the cables over so they make an x over the diff, then the cable ends fit onto the calipers perfectly. I've used rubber lined p clips to secure the outer cables to the top of the chassis rails above the rear suspension. I've madeit sound much more complicated than it is, if you get the cable in your hands, it just kind of falls into place. By the way, I took dogwood's advice and slotted the holes in the mounting plate, meaning you can fit the cable much easier, and without having to cut it. Hope that helps.

Adrian