|
|
#2
6th April 2010, 09:13 PM
|
|||
|
|||
Hi Ronnie, I read a lot about zetec/type 9 clutches etc when I did mine and all I can say is there is a lot of misinformation out there! Lots of people who say you need this and that without doing the job themselves at all.
I used a 2 piece clutch QKT1905AF & a bearing CCT 132 not 133. Mine is in and running and clears fine. Hope this helps, Dennis 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode